(Still need to test the OSSC running via my Lumagen video processor to see if it works like a VP50 )
As a baseline, my Dell U2414H monitor has 2.3/9.6/16.9 ms (top/middle/bottom) lag at 1080p@60 (equivalent to Line5x mode on the OSSC). In normal mode, the Mini 3D measured at 29.5/36.6/43.9 ms (+27 ms or a little under 2 frames) and 12.4/19.4/26.8 ms (+10 ms or less than a frame) in game mode. Myth busted, I'd say.
I suppose the numbers are a bit worse if you're using Line2x (480p) or Line3x (720p) mode, but I didn't test this.
The post was edited 1 time, last by dr_myslihiiri ().