Hatsune Mike
Champion
Did a little thing for running versus connections between two cabinets for head to head. Uses three Ethernet cables, as they are flexible and easy to get in varying lengths.
More details later - these aren’t available until I’m done with this splitfire batch!
A few bullet points:
• 3 Ethernet or RJ50 cables to link
• maps P1 inputs of second cab to P2 inputs; no need to modify wiring of either cab to accommodate.
• JAMMA stick, start, coin, and buttons 1-5 sent from JAMMA edge
• all CPS2 kick buttons compatible with no extra wiring
• JAMMA mono or line stereo audio
• line audio has dedicated ground to eliminate ground noise (buzzing)
• video and sync buffered so two mismatched monitors won’t be a problem
• Neo geo (stereo speakers, all buttons) compatible. Make a H2H Neo!
• JAMMA connector is keyed
More details later - these aren’t available until I’m done with this splitfire batch!
A few bullet points:
• 3 Ethernet or RJ50 cables to link
• maps P1 inputs of second cab to P2 inputs; no need to modify wiring of either cab to accommodate.
• JAMMA stick, start, coin, and buttons 1-5 sent from JAMMA edge
• all CPS2 kick buttons compatible with no extra wiring
• JAMMA mono or line stereo audio
• line audio has dedicated ground to eliminate ground noise (buzzing)
• video and sync buffered so two mismatched monitors won’t be a problem
• Neo geo (stereo speakers, all buttons) compatible. Make a H2H Neo!
• JAMMA connector is keyed