Need help I'm having a melt down

[8bitforlife]

ok I got my chassis from @rewrite but it's not a 29e31s as I thought it's a sanwa pm1745 15hz/24hz only
This is going in my konami windy2.

Iv bern told by @radiantsvgun that the 2930 is a direct drop.

So could anyone make me an adapter to power and get vga to and from my windy2 and monitor. I'll pay.

 

[nem]

What's the connector on the Sanwa? 15-pin AMP UP?

 

[Frank_fjs]

I need a remote board for a Sanwa PM1745. If yours is going spare I'd love to buy it.

 

[Hedonism Bot 2.0]

The nanao ms2930 tube and chassis is a direct swap. You need to swap tube and chassis.

 

[8bitforlife]

What's the connector on the Sanwa? 15-pin AMP UP?

this the connector

I got confirmation from the master grantspan the sanwa I have and 2930 use same power connector. Hes also sending me remote cable.

What I need now is an adapter to go to windy2 which is vga.

 

[8bitforlife]

https://www.digikey.com/products/en?keywords=050-84-1120

Is the male version.

Would anyone be able to make adapter?

 

[xodaraP]

Just be careful - if it's a PM1745 and you connect VGA to it, you will blow up the chassis. VGA is 31k

The Cyber Lead is 15/24 and uses a DB15HD (VGA style) connector, but it has pins removed

 

[8bitforlife]

Just be careful - if it's a PM1745 and you connect VGA to it, you will blow up the chassis. VGA is 31k

The Cyber Lead is 15/24 and uses a DB15HD (VGA style) connector, but it has pins removed

yes I know that's why I need something made for windy2. I have a konami jvs to jamma. Still connect the rgb vga to it.

I'm just not very good at doing stuff like this

 

[nem]

this the connector

Here's the pin out for it if anyone here wants to make an adapter for 8bitforlife:

https://imgur.com/a/fEyIKZw

 

[8bitforlife]

this the connector

Here's the pin out for it if anyone here wants to make an adapter for 8bitforlife:

https://imgur.com/a/fEyIKZw

wow thanks @nem
Been trying to find pinout on windy2 but can5

But if it helps someone this monitor I'm using has no 31hz

A 2930 nanao dsub/vga/DB15HD is a drop in replacement. (Just wouldn't add the 31hz stuff)

Windy2 gives power to chassis with a separate cable like this. Its same cable connector as 2930