What's new

Gaff77

Beginner
Joined
Jan 27, 2019
Messages
7
Reaction score
2
Location
Finland
Hi,

I have Sega lindbergh virtua tennis 3 cabinet (6800GT) (4:3 VGA monitor) https://bit.ly/2ydLigB ,
and I`m been thinking, is it possible to but Naomi hardware in same cabinet and use them both,with same controls and monitor.

Is Naomi using same JVS I/O board than Lindbergh?

could this work: https://amzn.to/2SwTCRH

If I connect video, sound and controls.
 
So both the Linbergh and Naomi would be powered at the same time or do you have a way to switch that also?

Technically the switcher should work .. only question is the USB for the JVS controls.
 
i think that they could to be powered at the same time with they own power subblies, and I just switch video/audio and controls. That sound most easiest setup.

And yeah, that USB for JVS controls is my biggest concern, video and audio should work.
 
Audio is completely the same from Lindbergh -> Naomi

Naomi is VGA output, I'm not sure what your virtua tennis cab uses (DVI or VGA) but a converter can be purchased easily if it is DVI. Make sure your Naomi is set to 31khz if you do use a converter (or probably regardless, as I suspect the flat screen is 31k)

The Type 3 I/O would definately be recognised and work with the Naomi, it all just comes down to how the controls are mapped. I suspect the controlls for Virtua Tennis Naomi and Virtua Tennis Lindbergh are the same, so they would work - things like Virtua Athelete, Virtua Fighter would also probably work - but it basically just comes down to trying it!
 
Back
Top