What's new

SmokeMonster

Champion
Joined
Aug 23, 2015
Messages
1,291
Reaction score
1,685
Location
USA
I picked this board up really cheap and it turned out to be a great bootleg (MK Revision 3.0 8/31/92, c-13234-40025). The seller listed it as for-repair because of a CMOS error at boot, but that was just the result of a dead battery.

I simply cleaned and recapped it (long-life 105C rated caps), added back the missing cap near the jamma edge, fixed botchy button wiring underneath, and added a coin cell battery socket w/rechargeable LIR2032. The nice thing about the bootleg is that it's Jamma+ so all buttons work perfectly with the HAS Supergun without a kick!

Before
Untested%20MK%20Bootleg%20Board%20Set%20-%20Front_zps7ask6f5l.JPG
(cleaned)

After
20160708_140919.jpg


Sony PVM 2030 Test Shots
20160706_172034.jpg


20160706_172113.jpg


20160706_171828.jpg


20160706_171950.jpg
 

Attachments

  • 20160706_171845.jpg
    20160706_171845.jpg
    974.8 KB · Views: 1,236
Last edited:
Nice job once again!

I like these boards with all buttons on the Jamma, used to own a SF2CE boot with all 6 buttons wired similar to a Pandora’s Box :)
 
How did you get kicks for this? Through jamma I'm only getting 3 buttons. No 4th
Obviously no 5 either but right now I get 1 punch, 1 kick and block. Missing 1 punch and 1 kick.
 
How did you get kicks for this? Through jamma I'm only getting 3 buttons. No 4th
Obviously no 5 either but right now I get 1 punch, 1 kick and block. Missing 1 punch and 1 kick.
Mine has a bodge wire or two underneath, but I don't have a picture. They connect these pins to the JAMMA edge.
 

Attachments

  • extrabuttons.jpg
    extrabuttons.jpg
    109.1 KB · Views: 264
I picked this board up really cheap and it turned out to be a great bootleg (MK Revision 3.0 8/31/92, c-13234-40025). The seller listed it as for-repair because of a CMOS error at boot, but that was just the result of a dead battery.

I simply cleaned and recapped it (long-life 105C rated caps), added back the missing cap near the jamma edge, fixed botchy button wiring underneath, and added a coin cell battery socket w/rechargeable LIR2032. The nice thing about the bootleg is that it's Jamma+ so all buttons work perfectly with the HAS Supergun without a kick!

I just bought the same bootleg, can't wait to recieve it. Do You perhaps remember the type / ammount of caps needed for a recap? Unfortunately can't find any schemes about it..

Thanks in advance.

Regards,
 
Extreme thread necro! Finish Him!

Have just bought this same bootleg based on the info in this thread, paid $US35

Will post results here when it arrives.
 
Back
Top