Hello. Can you help?
Sega rambo does not save setup settings. I have seen posts about this error before. Is there a solution?
Have you replaced the battery on the JVS IO card? If yes, then the only solution is replacing the JVS IO card -- it *MUST* be the 2007 version. 2004 version will not work.
Thanks for the reply. Yes I replaced the battery but it didn't get good. How do I know the 2007 version of the card?
It's printed in white text on the card.
Thanks. As for a faulty panel it can't be repaired in the evening with the wrong chip replaced? (If you can know which one stores the setting)