Recent content by -Ace-

Cheap logic probe from Amazon, also recomended to me by ShootTheCore: https://www.amazon.com/gp/product/B000Z9HAP4/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Quick update. . . . .we're in business! Stupid mistake on my part, but easy fix. Thanks for the help on this guy's!

Hmmm, now that I am in front of my boards, the B board I am using is a 91635B-2. I am using 27c400's for 1-8 and it looks like I also used 27c400's for 21-23. Boom, that may be the issue. Not sure how I overlooked the clear 4096 stamping on the board. Probably just excited to finally get this...

I don't disagree on double verifying the chips for accuracy, and givin' not knowing the issue, I will probably take your advice and do it. Not arguing here, but I too have probably programmed thousands of chips(writing eproms since 2000), and I have actually never, that I can recall...

I have no concerns about the program roms unless there was something wrong with the set I downloaded(doubtful). Speed I am not positive at the moment, but they are the same type eproms I have been using to do Capcom games for years, so no concerns there. The Gal I used is also the same I have...

The extra modifications like the LS chip and wiring ,etc? Yes, this has all been removed and the capacitor/resistor replaced following Undamneds video. I am using a B-21 C board I bought when that kind member here was offering them up from China- I just removed the battery(tried 2 different...

OK, so I used 040's on the Kabuki board- I think that's correct. I burned all the eproms, reversed the Dead Battery Society mod, put Undamned's CPS1.5 Q sound kit in, fired it up aaaaaaaaand nothing :( black screen. I pulled off the bottom most board just and tested with another CPS1 title just...

50

That's it, thanks guy's. . . and just to be sure, the board with the Kabuki- the (4) roms on there (q1-q4)are 040's correct?

I believe I have the files in order to burn, but am wondering about the PAL at location A1. I looked in Jamarcade, but didn't find a file for location A1. Because I am going from a Slammaster to Cad Dino, do any of the other PAL's need to be changed?

Would you mind linking to a brook ufb and retro board so I can see exactly what I will need to get? I ordered a Jammaizer but have no experience with it or the control connections. . . .

Thanks!

First, if there is a guide someplace else(looked all over this forum) that may make it alot easier figuring this out, please post where it is. I have most of a Slammaster CPS1.5 pcb set except for the B board, in which I am going to use a SF2 (91635B-2) pcb in it's place. This Slammaster was...

Yes, sorry to hear about your Corgi. I had lost 2 Golden's from cancer a few years ago- was tough. Really nice stuff for sale.

Jassin000 said to put me in his spot :)