Recent content by AlBekas

Curiously, the combination start + button 5 never worked for me

I checked my 161 in 1 the day I received it ;) It seems to be one of the last version, with voltage regulators (smaller than the ones in your video tho), and no hot glue. Like you suggested, I tried under voltage, but no difference (my PSU can't go under 4.82V). Thanks

Yes, it takes around 30 seconds to happen, weird. If I power cycle it off and on, the glitches take less time to happen, sometimes almost instantaneous.

Thanks Misos, I missed this post Will try the other combo keys

Hi Does anyone of you have issues using the combo 161 in 1 and Unibios v4 ? I can use the pick n mix menu, but I can't access the Unibios menu (start + select) with the adapter. Thanks

Thanks Ack I tried several things last night : reflow the L0 ROM and other chips not too small for my skills, recap the board (not the sound side), remove the Neobiosmasta board completely, clean entirely with isopropyl alcohol. Nothing helped... The graphic glitches are still happening after...

Hello Finally, I fried my MV1-b... Long story short, it happened trying to install an Unibios V4 with a neobiosmasta board. At the same time, I was trying to understand why I couldn't access the Unibios neither the pix'n'mix menus with the sat2neo adapter I have just finished to build and hardly...

Hi On the advice of XianXI, I would like to install this stereo mod in my MV-1b board. There is not a lot of infos for this specific MVS. I think I can grab +5v and ground on the bottom left of the board, but I don't know if I need to cut any traces or remove any resistors. Any ideas ? Also...

Hi everyone ! I am old in the retro but kinda new in the real arcade hardware. After building an emulation system based arcade, I'm now going the right way with a MVS and a supergun (Thanks to arcadeQC) ;) This forum already helped me for some of my projects, I have a lot more to do. Thank you...

Yes, I saw your DB15 adaptater and I was planning to wire it with the dupont connectors to the minipro, do you think it won't be adapted ? Thank you very much for the HEX file (and for all the rest ;) ) !

Thank you ! I will stick with the minipro I ordered then. Those USB ISP programmers are cheap though.

By any chance, do you plan to make a DIP version of it ? I am asking because I am not really sure if my programmer can handle the sm version (mini pro - also completely noob in chip programming) Thanks

Yes, you rock guys ! You're working too fast, every time I am about to order a board, you come with a new/better revision :D Thanks for your hard work