Recent content by Barth0lin0

Interested

a few stools for sure ! regular candy cabs height and Vewlix height if possible ! Probably an astro or blast, depending on price !

Thx man ! Did you adjust the HV pot to a specific voltage using a HV probe ?

Small update: Geometry and color calibration was succesfully done with the help of the great @Mrhide . b+ was ajusted to correct voltage, We didn't mess with the High voltage ajustment. ( should we ? ) those 2 problems remain; 1) Maximum H size is not enough for most PCB i own, both 15...

MS-2933 is the updated MS-2931: almost the same. Not sure if it's more reliable. It does leak (black goop). My 2933 was cleaned before i bought it.

New issue : managed to make an adaptor for the “so tiny” degauss switch connector on the 2933 ( same as 2932) Degauss doesn’t work . Tried to degauss via the OSD and nothing happens … Any clue ? Thx

You mean the siliconed pot on the chassis ? High voltage adjust ? I Not a great pic !! Calibration is way off ! (focus , Colors , etc) my friend @Mrhide will help me for final calibration

most ajustment on the 2931 and 2933 are made via the OSD. There isn't any adjustment pots on the chassis other than H drive , HV ajust , B+ and XPro. There is no jumper on the 2931 and 2933 unfortunately. managed to get full screen with recalbox RGB jamma pbc, atomiswave PCB, some Mister...

thanks! Also posted on AO ! i read that messing with the D drive pot was not a good idea ! I hope i didn't screw up :P

Hey ! got a working MS-2933 ( thx @kuze ) as a replacement for my beloved Windy 2 ( same Toshiba tube as my Nanao 2931 driven Blast City) i knew it's a different Yoke and that i would need to calibrate everything. ! It boots ok but i can't get the H size to fill the screen. Everything...

Found one ms-2933 ! I wouldnt mind finding another one to have a spare . Let me know !

Anyone would need this ? for parts mostly or repair if you are a repair god Issue: repetitive blown HOT , no image on screen but with a neck glow. Chassis recapped and flyback was replaced a few years ago. Issue thread ...

Unfortunately no. @Mrhide will be looking at it ! Sharp image wasn’t able to repair it

Re bump !!! My windy is broken since July 😭😭😭. 😜

re-bump!