Recent content by clintkolodziej

If anyone wants a case for this I created one and just posted it for anyone to print their own: https://www.arcade-projects.com/threads/sega-st-v-soundboard-jamma-helper-case.37481/

All, I designed a case for the JAMMA helper pcb for the ST-V soundbaord that @mathewbeall designed to keep it protected from damage. If anyone wants one I posted the files on my printables page: Case: https://www.printables.com/model/1737720-sega-st-v-matthewbeall-soundboard-jamma-helper...

Looks like @HardAzRockz posted this here as well with a video for those who want to see it in action: https://www.arcade-projects.com/threads/custom-backlit-sega-st-v-logo-for-darksoft-16-in-1-setups.37338/

Just a heads up as I figure those in this forum may be interested. @HardAzRockz had the ST-V Lions3 case and mentioned it would be nice to have something to cover the cartridge slot either if you use the selector in a remote/extension setup, or with one of the newer Lions3 cases that had the...

Heads up, if anyone has a Lions3 case and wants to mount their soundboard with the main pcb in a tidy package check out the mounting kit I designed: https://www.arcade-projects.com/threads/sega-st-v-sound-board-mount-for-lions3-acrylic-case.37288/

I just published a new design to help mount the ST-V sound board, with requisite Darksoft Dark Knight multi, inside the Lions3 acrylic case. Hopefully this will help those of us that had the case and later upgraded to the newer multi and sound board consolidate everything into one nice package...

Just a heads up as I figure those in this forum may be interested. I just posted two designs that you can print that allow you to mount the LCD or OLED selectors from the Darksoft Sega ST-V Dark Knight Multi onto the cartridge cutout on the Lions3 acrylic case. I got tired of the selector...

I’m interested in one!

Yeah I had to go upside down to fit it in the case, those heatsinks are huge. I’ve been eyeing those 12v fan headers for exactly that. I haven’t figured out where I might mount them though, but there should be some room in the front to run a pair of fans back across the huge heatsinks.

Here's a a preview of what I'll be releasing before long. Right now I'm working on an insert for the cartridge cutout on the Lions3 top cover to mount the OLED selector. I figure this setup will help at least a handful of people that bought this case long ago and later switched to the dark...

Wow this is awesome! I had seen your cases before but couldn’t print them on my Ender 3, I really appreciate you splitting them, now I can have a nice case to protect my GNET.

Pretty sure it’s a 1mm gap between the 3 “cover” and the 3 “base” parts (with the hex patterns). The bridge pieces have no gaps, those were the ones I was able to combine to single bodies.

I added a v29 fusion file with a combined body option for the support bridges (and STLs), that's gotta be a huge printer you are using. The cover/base panels themselves (with the hex grids) were designed with a gap between them so joining those bodies would throw off the hole spacing. Hope...

21.4mm, could be less if you use slimmer screws on top as well. I had to design that printed plexi for LE, I think you may be right, everyone seemed to put turtles or simpsons in these cases. I also have a SEGA System 16B in one, I didn’t listen when it said it was a Konami case.. 🤣

I picked up a Midway Vegas PCB a while back and found quickly that it's not really meant to run outside of a cab due to cooling and the multi-part pcb. To solve this I designed a case to hold the PCB and allow cooling fans to be mounted. This should support both Vegas and Durango CPU boards...