Recent content by csonesz003

Count me in for the preorder! 😄

The board was fully recapped by someone else (no idea who did it). When I compare the caps on it to the ones listed on Arcadeotaku, they're slightly different. My guess is that whoever did it, didn't really pay much attention to matching the exact values and currently I don't have any references...

Hey everyone, I recently picked up a Nanao beauty, but I noticed that someone had already recapped it and done a bit of work on the board. I ordered the cap kits based on the list here: https://wiki.arcadeotaku.com/w/Nanao_MS-9_capacitor_listing (also found the same listing in a few other...

Bumping this thread. I also found a broken one on my MS2933 neck board, it connects to the blue color line. Was anyone able to source this stuff? Maybe this one is suitable? https://www.alibaba.com/product-detail/Hot-Sale-OKAYA-RA-102M-C6-1600378134115.html

650 eur + shipping

I think you need the DL-2929 IC. I don't have a spare one, but probably @cruzlink2 can help you out.

I have 2 working ones and some spare ICs. What exactly do you need?

It is based on the corrosion. It sounds a bit radical, but I used 1000 sandpaper to remove the oxidation, since q-tip didn't help with 99% IPA. I think the best option is an IPA + fiberglass pen combo.

Clean the cart socket and reseat. If it doesn’t boot at all and you get a black screen, you might have issues around the cart.

UP!

UP!

Thanks for the suggestion, but that was our second step that we measured and looked under the microscope. There is a good continuity from the jamma edge to the resistor arrays and also from the resistor arrays to the IC. I don't know what else can we check.

Hey folks! I'm looking for a CPS3 donor board with working DL-2929 custom IC OR a standalone DL-2929 custom IC to replace mine. (P1 down, P1 button 4 and Test button aren't working) - no, there are no lifted or bridged pins :) Thanks in advance!

@SurferGuy420 it’s working with both

Please add me to the list, thanks!