Recent content by dan-esc

  1. dan-esc

    Australian Roll Call / Registry / Deals Thread

    1. dan-esc 2. QLD 3. Soldering, just about to do an OSSC. I can make RJ45-to-console cables. Artwork / drawing. 4. More open source projects to solder 5. danaubin.com
  2. dan-esc

    Minigun Supergun - An Open Source Supergun

    Thanks mate that's cleared it up.
  3. dan-esc

    Minigun Supergun - An Open Source Supergun

    Hi all, Currently my Supergun is turning on without the switch turned to 'on' Would this be an issue with the soldering of the SMD part that connects to the switch and should all legs of the SMD part beep when using a continuous check with the multimeter? To fix this would one re-solder the SMD...
  4. dan-esc

    Minigun Supergun - An Open Source Supergun

    Sure do, appreciated. I believe it’s the same cable I power my GTX 1060 with
  5. dan-esc

    Minigun Supergun - An Open Source Supergun

    SeaSonic 550W M12ii Bronze from my PC. Thank you
  6. dan-esc

    Minigun Supergun - An Open Source Supergun

    Thanks boys, a) I’ve confirmed continuous beep from A-F pins and 27 & 28 on the Jamma connector. I’ve added some solder to all pins for a more solid finish b) Reseated the connection against the arcade board to be pretty much exactly in line My thought is, I hope the board works! I bought the...
  7. dan-esc

    Minigun Supergun - An Open Source Supergun

    Hey all, This is my first PCB’s soldering, I’ve run into the trouble of the power not turning on. Just wondering if there are any obvious mistakes I’ve made, thank you
  8. dan-esc

    Minigun Supergun - An Open Source Supergun

    Hi all, just wondering if you guys know the colour code for 8 Pin MDIN to HD15 (VGA) cable. Do I need a multimeter to solder the correct cables as some colours don't match
  9. dan-esc

    Minigun Supergun - An Open Source Supergun

    Ah okay beauty, will try to pick up a cheap board to test. Really enjoyed the soldering as a project in and of itself.
  10. dan-esc

    Minigun Supergun - An Open Source Supergun

    Just about finished soldering my Supergun Minigun - SMD was a new experience so I was just wondering. I see there is a 'service' and 'test' button, is it possible to connect the supergun minigun to a monitor (MINI DIN -> HD15) and a PSU (can I use PC power supply?) Then run a test and see if it...
  11. dan-esc

    Minigun Supergun - An Open Source Supergun

    What would be the best way to output the 8 Pin MINI DIN to HDMI or VGA? as a SCART compatible monitor isn't available at the moment.
  12. dan-esc

    G'day from Australia

    Hi all, After purchasing a Raspberry Pi Zero and wanting to add some features I've just started to solder. I'm a big gamer and love the nostalgic look of the arcades, and joysticks however maybe even more interested in the 'making' side of things Inspired to join by Frank_Fjs' projects and...
Top