Hello guys.
I have a netdimm which works fine on my Naomi 1.
It shows error 01 when I use it on my naomi 2 which has 1 of the heatsink detached.
I bought another naomi 2 recently because i thought the error 01 is caused by the detached heatsink which might have damaged the gpu.
However, the...
I have returned the Xeon E3-1290 v1 to the seller and got a i7-2700K. Runs fine in my TTX3. I have replaced the cpu heatsink with the Thermaltake Toughair 110 and a Noctua NF-F12 Industrial Fan.
I replaced the case fan with a NOCTUA NF-A15 HS-PWM CHROMAX.BLACK.SWAP fan. runs well and I got a...
yes i did. i updated it using the tool in the latest v4.1 multigame because i wanted to upgrade the geforce 680 to a geforce 1060. it is updated to the latest b23 bios.
Hi I have upgraded my TTX3 with a Xeon E3-1290 but the TTX3 doesnt boot. there's no beep when it starts and the tv remains at no signal. swapping the original i5 2400 back works fine.
Is the Xeon faulty or not compatible with my TTX3 motherboard?
the games should only output 1080p no matter what settings is set as arcade games are usually hardcoded for a specific hardware. i might be wrong but that's what i'm told. maybe t7 and exlayer draws more power or heats up the card faster and the card can't cope due to some reason. try replacing...
The extra power required for the overclocks would be justified if there's better performance but there isn't so no point in having the original 3A bios drawing so much power for a measly 78Mhz gain with no extra performance. I will stick with the Twin Frozr bios as it allows 60Hz. The original...
Finally got it working properly. With the original 3A bios, it works on the PC. I get 60Hz in the SFV benchmark on the PC. With Furmark, I saw it draws about 232W for 50fps in 1080p with no MSAA. With MSAA, it gets lower the higher MSAA I go. I get 74fps with 720p. i flashed it with the Twin...
yes thats why i am at my wits end with this card. i am going to do something else for now. i will come back to diagnose what is the problem later on. thanks
the driver is fine. but the 1080p resolution is hardlocked to 30Hz even if the nvidia control panel settings is not 30hz. mine is set to 120hz. i had no problems with this setting with the 660gtx. the lowest i can go is 100hz in 1080p. i don't know what else to do.
i got it working finally. it was just the case fan not connected yesterday. i flashed it back to the original 3A firmware and set the hdd security again. finally works.
the weird thing is fighting layer EX is sluggish. worse than the 660gtx which had the thermal paste replaced. i launched the...
i've flashed back the card with the 3A firmware. it just hangs at the white ttx3 logo screen. i will try the firmware you posted. i actually did not connect the case fan.
i found out it causes the black screen with a flashing prompt when i reinstall the 660gtx card without the case fan.
how do i...