Recent content by DaveR

Well I ended up messing up the second set by removing the 117 and swapping it, might have been too hot .. i don't know. So at the moment the boards got swapped out at the arcade I work at as they had a broken IO and I had a working IO (bottom board) and a good cpu board, it is now...

was this sorted?

https://www.instagram.com/p/Cu0MXKJt6tV/ Fasinating seenng all the cabs connected together. I presume they stand up as al the players change positions?

ahhh wondering what that socket was as no Pic... mines got a Time warner version according to ROM ident and found two of the ROMs with unknown content. so i now made all the ROMs the Time warner version but still nothing ... im getting a single tick from HDD and no outputs and feels like so...

We been searching for this for our cabinet for an arcade in the UK. No luck so far -

lookng for this game board, others in the series is the original Racing Jam and also the original Thrill Drive. We have the game, just no board as it went off for repair and wasn't possible few years back, now to find a rare board as Mame option is not really good enough yet UK

Ok, we were in last night, we did swap CF's between both machines, problem remained with same side. Swapped PSU as one was sligthly undervolt and we did raise it a little, made no diffence. Change'd Phono network cable, not really did anything. Put both as Network ID 1 and attempted to make...

Ok so I can do a test by swapping game drives over or CF cards (not been inside yet to verify)

We got a Thrildrive 2, Viper Hardware. Left driver started playing up. We get numbers in a texture map on the wheels on one of the cars We get a huge delay starting the game (black screen) until it syncs with the other player. We thought about swapping drives (if its just drives) but the...

okay thanks maybe i will look at the thermal side - i haven't put 240v through it yet and powered it. yes mine seems to be direct connection with jumpers for RS422 on board.

Hi all, I got pair of Sega Sonic All Star's racing in storage for time being, the Drive board went on one and then went on the other, so it starts up and fails to move the steering wheel causing an error code. I have inspected the boards and cannot see any visual faults. What dies on these...

well that was a lot to read, well done with the project so far - interestingly, I got see a RingWide running Sonic all stars racing cab so did anyone test your project on an RingWIde(edge) setup and how far did you get ?

Sorted with new ATX Powersupply, it was slight voltage drop when HDD was accessed.. i also wired the JVS directly in with a molex connector to keep that powered up .

I actually have a spare NAJV2 I/O which I bought as a spare for Lost Land Andventure... anyway, this is TC4, notice transistors missing... gun board is under this board and connected to it

using a ATX Power supply on an Afterburner and I powered the JVS off it too. The original power supply was poor and mostly was trouble when HDD was accessed at times. I posted about this not long ago