Recent content by DelsArcade

It's nice to hear some feedback on actual purchases. Thanks for sharing! Del

Have you tried populating the missing caps?

The top of the Yoke should match where the anode cap is.

This. That's how I play Dolphin Blue. I have a Dreamcast that has the M.O.D.E installed which allows the Dophin Blue Dreamcast conversion to run. (And Metal Slug 6 as well). Del

I'm not quite understanding what hardware you have. Can you post pics to better describe it?

@r27blades Where in NY are you? I'm heading out there tomorrow in the Queens and Long Island area. If you're close enough, I'd be happy to pick it up and try to work on it for you. If not, you can also mail it, I'm in CT. I wouldn't mind taking a crack at it since I have the tools to do it...

Take a pic of each board, front and back and post here. Perhaps there is something that will stand out as to what's wrong. Also, I'm assuming that they were installed correctly in the cartridge and not reversed, where the top and bottom PCBs were swapped by mistake? Asking only because with...

Paging @jimbodeanny for the Vapor TRX stuff. Del

More pics...

Just worked on giving mine an overhaul recently and put it back in. :-) However, I plan to take it out the monitor again so that I can gain access to my speakers, which need to be rebuilt. I can take some high-res pics when it's out. In the meantime, I'm going to paste below what I have. I...

Let me know if you are selling these. I could use one for my Blast City and Astro City cabs. :-) Nice work! Del

Someone else on the KLOV forums suggested that too. I ended up patching it up. We'll see how it goes. KLOV thread here: https://forums.arcade-museum.com/threads/nanao-ms-30-flyback-epoxy-repair.549410/ Del

Was taking off my flyback in order to clean the infamous Black Goo that was everywhere. In doing so, the brittle plastic support snapped off. I'm inclined to think I should just leave it off and just put some epoxy there to prevent cracking, etc since these fly backs are obsolete. Any...

@jamesv833 I think you were looking to buy a couple. Del

Could be a focus pin issue on the socket (CR-23). Probably easier to swap that out first and see if it fixes it. https://www.arcadepartsandrepair.com/store/monitors/monitor-parts/cr23-crt-socket-mp1042/ Del