Recent content by Denson

  1. Denson

    Faulty SIMM socket?

    Hi, I have around 10 faulty CPS3 motherboards laying around. Most have obvious damage in one place or another but you may be able to salvage a good socket from one of them? let me know if you’re interested and I’ll have a look through them for you.
  2. Denson

    Brook retro board set up help!!

    My console is a UK PAL unit, with 60hz region switch (which I run in 60hz). I tried it switched to 50hz to see if it made a difference and it didn’t... My SNES cables came from one of the leading sites too..perhaps they’re geared towards a US console? I have numerous Super Famicon joypads...
  3. Denson

    Brook retro board set up help!!

    Small update: I have tested with a ps3 cable, and also a pc engine cable and both appear to work fine. So either I have 2 faulty SNES cables, or the boards just don’t like them for some reason.. It looks like I’ll have to try to locate a different source for a SNES cable and try that. If...
  4. Denson

    Brook retro board set up help!!

    Ok, so I’ve connected all of the controls to J9 and......still nothing. No inputs working at all. The blue light on the retro board still come on, but nothing works. I feel that I must be missing something here as these are supposed to be simple plug and play devices, but for the life of me I...
  5. Denson

    Brook retro board set up help!!

    Hmm...I’d read that and understood it to mean that I didn’t need the jumper as I was only using the retro board without a UFB? Is that not the case? If so it might be an easy fix?!
  6. Denson

    Brook retro board set up help!!

    Haha! Yeah I’ve already checked that as it’s the sort of thing that’s so easily done, but they’re around the correct way. I don’t need anything connected to any of the other connectors to make it work do I? And I’m assuming it auto detects the console it’s connected to? Thanks for the replies...
  7. Denson

    Brook retro board set up help!!

    Hi, Thanks for your reply. I was hoping to avoid having to wire all of the buttons individually to J9, hence getting the pre-crimped cable for J8, but it’s worth a shot. Like you say, I can start off with a single button and see how it goes.
  8. Denson

    Brook retro board set up help!!

    Hi all, Has anyone tried hooking up the Brook retro board? I’ve tried 2 and cannot for the life of me get them to work.... I must be doing something wrong as I can’t believe that they’re both faulty. This is how I’ve set them up: The stick and buttons all connected to the J8 on the retro...
  9. Denson

    Help with Sigma AV7000 controller build

    Oh and it doesn’t go left....! ;) I’ll get around to sorting it at some point, but as I prefer Sanwas this was my first job before fixing it :D
  10. Denson

    Help with Sigma AV7000 controller build

    They look fine, and they have auto fire, but they’re Seimitsi stick and buttons and I’m more a Sanwa man myself ;)
  11. Denson

    Help with Sigma AV7000 controller build

    Ah ok. Thanks for your help with this, and the quick replies. I’ll give it a go today and see if I can get it working now :thumbup:
  12. Denson

    Help with Sigma AV7000 controller build

    Ah I see.....! That makes sense..thanks 8) Is the +5v used for anything at all then?
  13. Denson

    Help with Sigma AV7000 controller build

    Hi, I have a Sigma AV7000 supergun with a faulty 9000tb joystick, so I’ve decided to use a couple of old Madcatz T.E. sticks with it instead. I have located the pin out for the 13pin din connector of the AV7000, and while it has pins for every direction and 6 buttons, it has no ground? It has...
  14. Denson

    Wanted: US resident to buy and ship to the UK (only once!)

    Thanks! That’s great :thumbup: I’ll sort out the links tonight and pm them over to you. We can take it from there. Thanks again,
  15. Denson

    Wanted: US resident to buy and ship to the UK (only once!)

    Hi, Thanks for your reply. I’m looking at buying 10 or so of the following (in different colours) for some projects: https://hypermicro.com/mad-catz-fightstick-te-bezel-blue.html This is the site, and they have various colours. I have tried to order with delivery to Stackry (a shipping...
Top