Recent content by digitron

I'm dumb, didn't realize you have to Pause it first to get to the menu, sorry! lol

Curious if anyone flashed their ROM on an actual PCB and can confirm it's working? Seems to work fine in Mame, although I've noticed inconsistency with accessing the menu in-game, sometimes it works other times nothing. Thanks for your work Alamone!!

bump

.

bump

$110 for the AP homies SOLD

Boxed Namco Arcade stick originally for the PS1. I carefully modded this, no cuts or drilling were made to the body whatsoever. The JLF joystick mod is completely reversible and includes the original joystick body and switches so you can revert it back if you want. I also added Cherry D44X...

Available for individual sets, preference going to someone buying more than a single set. :) $22 /set + shipping

Have 4 sets left, I only needed 1 set so selling the rest here at my cost (shipping & manufacturing isn't cheap on these, unlike other PCB's). Would rather sell the 4 sets together but will open to individual sets if no takers, These were made to spec - 1.6mm, ENIG, gold fingers, 30 degree...

I drilled out the holes on an old JLF base and cut the tabs off. RGB, you got me pointed in the right direction with using the stock Namco shaft. The pivot, spring, actuator from the Namco stick all fit fine in the JLF base. Imagine fitting a LS-32 in this thing, it would be splendid :D. Wish I...

Rough draft maybe = PS5 > HDMI to VGA Transcoder > (Extron RGB Interface, DDSP ON) > RT5X Scart > RT5X HDMI Out > HDMI to VGA Transcoder Just messing around with the input signal working through the RT5X from a laptop. I think it will work, pretty troll but it might be fun.

Probably RT5X :)

Would be fun to downscale a PS4 M2 port to 240p and connect it to this bad boy :)

RGB, thank you for sharing your gerbers for the PCB! I'm going to try your PCB in my Namco stick. Curious, how in the heck did you squeeze the JLF in there? :)

Can you please describe the smell? 😁