Recent content by Firehawk

Haven't tried it with a vewlix/hdmi but RGB-PI OS works great for TATE. https://www.rgb-pi.com/#os

I have received it. It's very well packed and sorted. Still need to install it.

Yes I had a conversation with him via mail and he is on holiday. He will open the store again in the first week of August so we can order.

Ok thanks for your reply, send you a pm.

Did you already send payment requests? If so then I didn't receive it.

It was indeed the purity rings. Adjusting them solved the issue. Before and after pic.

Thanks, yes I already spoke with somebody else I need to check/adjust the purity rings. Will look at it this evening if I can fix it. This one has it worse but also a round spot near the side and fixed it with adjusting the purity rings. Will check it and come back. View...

I have a weird issue which I don't know what can cause it. On the left side of the tube I have a spot which is only visible with the red color. Spot gets pinkish or pale red. It's only with red, with other colors I don't see it. The chassis and neckbord is recapped and cleaned 3-4 years ago. In...

I know muchi muchi pork have a lot on trouble on the pi4

Thanks for this topic and with the help of a friend we did the sharpness mod. For me the end result is a very noticeable. Sharper and thicker scanlines. Only had to turn the screen pot a little bit to make the screen a bit brighter and that's it. Before and after.

I changed my stock monitor last week with the lg 32gp850. Stuck it in the frame with some thick foam material and some wood. For now it's ok till I can a buy a bracket.

You have to give your pc another ip address, not the same as the mister. For example 192.168.68.51

Had to login to the mister via ssh, via ftp it was not possible it would not write to it. When i was logged in via ssh it was out of the top of my head nano /etc/dhcpcd.conf Then insert the lines and crtl+o to save and then ctrl+x to exit.

I got a direct connection to work via a patch cable from my laptop to the mister. You have to put a static ip in your laptop ethernet adapter also for the Mister. In the Mister you need to edit the /etc/dhcpcd.conf And then put this in there: interface eth0 static ip_address=<your_static_ip_here>/24

If you have the latest groovymister core on the mister you have to enable it manually in the menu. At default it's on off.