Recent content by Fletcher

I meant to post ages ago, but I just wanted to say everything turned out great. Excellent product! Here is the before and after:

Filled out the form. Hoping for a batch 3!

Okay, I think this will be helpful to people. While working on some monitors last night I lined up a G07 tube next to a K7000 tube and noticed they were nearly identical in terms of depth. Just to be sure, I swapped the G07 into an extra K7000 frame I had sitting around and measured them front...

Finished! After following Hursit’s advice, everything went great. Thanks for all of the help. I’m really happy with how they turned out. Here are some pictures :) And a quick video: View: https://youtube.com/shorts/_8RbuZkwOks

Thanks! I figured it had been covered somewhere. I'll try it out

I’m working on my second machine and I’m hoping to make this one a vertical setup. I managed to get the monitor mounted, but I realized that as currently configured I won’t be able to close the back. Am I supposed to modify the frame? I noticed there are multiple screw holes and maybe I can move...

Another solution would be to add a matching molex connector on the wires going into the isolation transformer so that people could swap between powering the included plug or the isolation transformer. That was my original plan before I realized I didn’t have any .156 male pins (and I figured I...

For my speakers, I just got the ones off of Parts Express that someone linked to a few pages back. They are just barellllly too small for the bolts, so I widened the bottom two holes by about a millimeter using a drill and now they fit perfectly. I haven’t wired a QSound amp or anything, so it’s...

Here’s a quick video :) Set to ¥100 View: https://youtube.com/shorts/ltGgxTczBZk?feature=share

I got my first one all wired up and ready to go. I hear people have been wondering how to hook up the isolation transformer — I don’t know what the official way is, but I’ll show you how I did it. I added another spade connector to the included ground wire and ran it from the emi filter to one...

The two I received are just chirping as well

Made some progress so I decided to take a few pictures. I still have to mount the monitors and finish the wiring, but I'm really happy with how these have turned out so far. I have to say I'm amazed at the craftsmanship that's gone into these – they are so well built. My only regret at this...

Super excited to add these to the collection! Thanks so much to @hursit and @Cereth for pulling this off! And big thanks to @Lemony Vengeance for the delivery!

use a multimeter to check the AC voltage coming off of the secondary tabs before hooking it up to your monitor just to be safe

Connect the power cord to the primary tabs, then run wires from the secondary tabs to your monitor.