So this is where I’d learnt that is it not possible to convert 32MB to 64MB since actually the pu out is different.
So the new 128MB Simms are made only of Normal pinout chips or both normal and reverse like the original finaly ?
finally, on of my upgraded SIMM is working, but not the other.
my setup is :
slot 1 - 64MB
slot 2 - 64MB (not required)
slot 3 - 128MB working
slot 4 - 128MB (32MB upgraded to be tested)
slot 5 - 128MB working (only 32MB required)
When installing SFIII NG, it stops at 54%. I have an error...
I successfully soldered the ICs on 2 32 SIMMs boards.
Now they are recognized apparently as 128mb SIMMs
There is no more 32M indication on the Flash utility of the Superbios
I can erase them and run the write test on them. So it seem to work ok.
But when I place them in slot 3 and 4 of the...