Recent content by JacksonRR1

Any recommendations on where to purchase one that will would on a mv1B? Seems like the new version is sold out again?

Good Morning! Just to confirm, will this cart have a soft reboot function like previous 161s? My current banana cart soft reboots when you hold start. Trying to clarify if I need to look into a Unibios. Thanks again for everyone hard work on this project.

Can you make your drive link public? Are you using OS2 or 4?

Thank you for putting in the effort and intricate tech knowledge for us less experienced. Super excited!

Hey Guys! Big thanks to @snakeGrave for archiving a 1:1 scan of the original 2P 6 button panel. This allowed me to measure and make 2 replacement DXF panel files. I am not calling them reproductions as these are not 100% perfect. Sticks and buttons clear without interruption. These mount to...

If you want to PM me, we can run through some things to try so we don't spam Crown's thread. I truly believe the root of the sync issues are software related. It worked flawlessly in one of my other cabs no tweaking needed.

My monitor was a G07 and it was driving me nuts as to what was going on. So i tried lots of things. Which screen is not syncing? Menu or game?

If a an MVS Cart spot is available. I would appreciate the consideration for one. Please let me know. Thank you. Great job to everyone involved!

@man1aco Can you confirm if this is correct in identifying the type for JEDEC or NON JEDEC? https://www.jammarcade.net/1mbit-eprom-confusion-jedec-vs-non-jedec/ That is what I'm going by. The jumpers for the Sony CXK27C1001DQ-15 used in my COA are crossed as Jedec. The changes to your XLS...

UPDATE: Upon further look, Eproms 1 and 2 are JEDEC, I don't believe I need to change the jumpers. I can also confirm they are getting 4.96v. Enough to power the sound chips on another b board just fine. Still need confirmation on the 42 pin mask rom type to check it. Pretty much back to...

@man1aco Ok, had a moment to check these items. Jumpers 10 to 13 SOSO - Confirmed Eproms 1 and 2 are Mitsubishi M5M27C100K- 15. Per the pinout I found they look to be NON jedec. Sockets 11 and 12 are 42 pin. The COTA roms were MX23C1610. Pin 22 is the VCC. Did you want me check that pin...

This product works great and would recommend. Thank you @Crown Arcade Shop. Any and all problems on my end are software related. Needed a sync cleaner for it to lock on my intended monitor. Anyone on pi3b/OS2 figure out how to get the extra skins to show up? The wiki has instructions but seem...

@Hackcell These look amazing! Will be in need of an overlay soon, for a project I recently started. If you would be open to a commission, please let me know. Thanks!

Awesome. I will check all these items next and report back. The roms on the daughter board are soldered directly, so that maybe last resort territory. Also read something about the reason daughter boards were used was in relation to the rom type and size they had on hand. Or else the would...

Hey guys! First wanted to thank everyone for the contributions on this thread. It gave me the confidence in trying to dive into a conversion I have. Running into a few issues and wanted some guidance on what to try next. Long story short. Converted my confirmed working infinikeyed COTA to...