Recent content by japanese arcade otaku

  1. japanese arcade otaku

    Sega Naomi NetBoot Games List Working/Not Working/Untested/Missing

    The BIOS originally installed was version E, so that will likely have to wait for the time being. I don't own a ROM writer.
  2. japanese arcade otaku

    Sega Naomi NetBoot Games List Working/Not Working/Untested/Missing

    Hmm, the same problem occurs. I am using Naomi 1 and a multi-BIOS.
  3. japanese arcade otaku

    Sega Naomi NetBoot Games List Working/Not Working/Untested/Missing

    It appears that *Senko no Ronde: New Version* is not accepting coins and is failing to operate correctly. I have tried the coin switch, the service button via JVS, and the service button on the motherboard itself, but none of them work at all. Is there anyone who can verify this issue? For...
  4. japanese arcade otaku

    Sega chihiro having trouble setting up netboot

    Is it possible to launch the game from the disc?
  5. japanese arcade otaku

    DARKSOFT Games Fixed to work with DIMM

    This is just out of personal interest, but would it be possible to create a patch that allows games which normally only run at 31kHz—such as *Rhythm Tengoku*, *Airline Pilots*, and *Sega Strike Fighter*—to run at 15kHz?
  6. japanese arcade otaku

    [Already resolved ]Regarding a strange phenomenon that occurred with my DIMM for NAOMI

    I am writing to report that this issue has finally been resolved. To begin with, the reason the Naomi system wouldn't boot when I installed two memory modules was simply that the voltage was too low. When I raised the voltage slightly, it booted up successfully, but an "Error 27" appeared. It...
  7. japanese arcade otaku

    Please help: Taito F3 graphics issue.

    Hello to all the arcade PCB enthusiasts out there. I spent yesterday trying to fix this issue but had no luck, so I’m posting here in hopes of resolving it with your help. I’m having trouble with the graphics on my Taito F3 system. Unnatural red ghosting appears on the demo screen, and areas...
  8. japanese arcade otaku

    Those of you with 512MB and 1GB DIMM boards...

    A conclusion has been reached regarding the compatibility issues with DIMM memory. Please take a look at this site: ↓ https://www.dentsubo.net/~nosuke/diary/diary.php?y=2026&m=2&d=26&n=26&x=26
  9. japanese arcade otaku

    Sega Naomi NetBoot Games List Working/Not Working/Untested/Missing

    The same issue occurs with this ROM data as well. Gameplay video below ↓ View: https://youtu.be/LU502d-7vf8?si=01ee0Lf3bNzAE8rf
  10. japanese arcade otaku

    Sega Naomi NetBoot Games List Working/Not Working/Untested/Missing

    I immediately obtained the ROM using the link you provided and gave it a try. While the game does launch and appears to run normally, I encountered one issue while playing: the game frequently freezes during scenes where characters speak. It resumes after about 20 seconds, though sometimes it...
  11. japanese arcade otaku

    Sega Naomi NetBoot Games List Working/Not Working/Untested/Missing

    The MD5 value of my file is (6e98fc9fb945ab4a4bf575d3093e494f).
  12. japanese arcade otaku

    Sega Naomi NetBoot Games List Working/Not Working/Untested/Missing

    Does anyone have a working ROM image for "Kasei Channel Mars TV"? The list states that it works, but simply combining the data doesn't seem to be enough.
  13. japanese arcade otaku

    DARKSOFT Games Fixed to work with DIMM

    Thank you very much. I am truly grateful.
  14. japanese arcade otaku

    DARKSOFT Games Fixed to work with DIMM

    Have you forgotten about me? I don't mean to rush you, but I am posting this just to check in.
Back
Top