Recent content by Koolhass

Hello Cruzlink2! I noticed that you installed a DC Digital in a board that's identical to mine. It's different to he Naomi 1 that appears in official instructions! Please, just to be sure, let me know if what i need to do is: Remove C111 and C112 capacitors. Connect flex to 3.3V and 5V pads...

Got it, that was the problem, i forgot to activate it there, thank you so much!

Hello guys, someone using OpenJVS and WiPi Netbooter? I'm currently having a little problem with Game Mappings. Games load fine but they ignore the game mapping settings. However, if i use OpenJVS Control i can "override" the control scheme with the correct one. Any ideas?

I recently received my Open JVS HAT, so far so good, a great option to streamline Naomi setups!

Hello! i'm about to do the same mod, can you please post a close up picture to the wiring so i can copy the routes?

Thanks a lot! I'll kill two birds with one stone! I see in your photo that you used some sort of breadboard to wire it to the I/O?

Hello everybody! Today i decided to change my Naomi 1 fans for new ones, more silent. everything went smooth, but when i plugged everything i noticed that my capcom I/O emits a coil whine, a high pitch noise that was probably hidden by the loud noise of the old fans. My setup consists of a...

Guys, a little follow up to the original post. The problem appeared again, i discovered that was inluenced by temperature or voltage. I have my CPS2 decased, and discovered that if i used it without the fan, the glitch was less persistent. Also, feeding the board with more than 5.00 volts also...

Nevermind, alredy done with the installation, awesome image quality!!

Hello! coax cable noob here, if i use this cable do i need an additional jacket?

Dammit too late, no stock now :( i want one

Yes, i recommend you to buy a desoldering gun to avoid damaging any parts. You can practice with it in a scrap board before trying it in your shiny arcade board.

Hello guys I recently noticed that in certain games and certain colors my CPS2 makes some faint video noise, as seen in this video (yellow and light blue color): My current setup is a CPS2 with a multi kit, a HAS supergun, and a meanwell PSU, a OSSC and a LG OLED B9 Is this normal for RGB...

I fixed that by replacing the super capacitor on the A board, i used this one: https://console5.com/store/33f-5-5v-memory-backup-capacitor-for-nec-systems-super-capacitor.html

Guys, just replaced the super capacitor and the problem was gone, thank you for all your help!