Guess it’s good you could get them all through the doors without strip down. I’ve moved 2 Nac’s now up 3 flights, first solo, defo was better with a friend but had to fully take them apart. The taillift looks like it saved you a lot of pain! You can now ruin your back shifting all the records 😆
Much Appreciated - yeah don’t think the u’s match on mine. Sorry for basic question, Prob need to step up my kit, you’re saying test these with logic probe right ? Haven’t got too far into testing socketed EEPROMs. Matt
It returned. Damn had it in the nac, seemed to have set itself to 1player only, went into setting to change to 2player then the 12c error kicked right in again. Here’s a vid of me trying the hold test trick, seemed to be stuck ..
https://www.dropbox.com/s/g0djlfwo7yz6s9m/IMG_5766.MOV?dl=0...
Thanks appreciated - thats the route I went - hooked up to a scart crt works well. At the time was just exhausting the routes as the lcd is 4:3, rotates easily etc so quite wanted to test it on that. Like you say looks better on the old trinitron I got!
I know there’s a good older thread here getting the right crt to run some of these Seibu boards, but I’m just seeing if there are any options or set ups to get them working with an lcd. I have a pretty decent 4:3 eizo flexscan 2133 monitor so seeing if I there are any options. Currently I’ve...
Yeah, I’m not super experienced so part of me is do I take the two boards apart have a look/reseat stuff or because it’s working now just leave it as is!!
These aren’t too bad, but maybe need to add some so I can add feet that actually touch the surface and not just rest on the pcb chips etc. This was all I loosened to get the sprites back, plus before and after (though before in a cab, after on the bench)
Picked up a r-type Leo wasn’t showing sprites and thanks to checking here and a few places I ended up loosening one of the board screws which seemed to settle the connectors between the two boards and sort it. Bit awkward these double boards just thinking of a good way to store it or maybe help...