Recent content by M4rIo

You should try a Mitsubishi LVP-FD630, I think it's compatible but I've never tested it, you can find it on Japanese auctions at a fairly low price..

The projector is a NEC NP-PE401H Dlp, however it has a dedicated firmware for Namco arcade.

Hi guys, sorry if I get in the way but it is clear that @darkgame is forced to totally depend on a translator, so it certainly has great difficulty in understanding the concepts in English. I am Italian and I wrote in Italian to @darkgame in PM but he strangely replied in English using Google...

have you reprogrammed the 2 Panasonic?

Are you sure they are for the SDLX?

did you get your hands on this I / O? Bad…. If for some reason it has failed you will have practically 0 chance of finding it as a spare part, unfortunately these arcade cabinets are quite problematic! Have you reprogrammed the 2 Panasonic? If so, how?

“alls saw” means SEGA ALLS? Google translate from Italian? 🤣

Hi @multiretroproject To program these actuators you must (preferably) have a PC with Windows XP 32bit, a serial port or a USB-RS232 adapter, the software you need is called "Panaterm", lastly you need a specific cable to connect the actuator to the PC, for this I can provide you the diagram...

this is the problem, the Panasonic must be programmed with the correct parameters, I have reprogrammed many of them, I could help you to do it, but you should send me the servo driver board in Italy… where are you? Or if you have the possibility to program it independently, I can pass you the...