Recent content by merrygoomba

I finally got around to do this mod,it worked great!

Thanks! I'll get to work on this on the weekend,I'll post the results.

Hello @RGB ,thanks for the response,no need for a refund,I'll be keeping the adapter as I can probably use it for future applications and I'm sure someone will eventually come up with a fix. In the meantime I'll revert back to using my HAS 4.1 which does work with the PS1 style dongle and PS1...

It's a CPS III board,going to a CRT.

It's going to a CRT.

I just received my HAS SNES style adapter,unfortunately it doesn't seem to work with the HD retrovision cables,I tried both sync settings in the menu but no picture just a rolling wave on the screen.

@RGB Thanks,after moving the cables around and unplugging and re-plugging the harnesses,I'm getting voltage readings that are closer.

About the HAS JAMMA extension cable : Should I adjust the voltage according to the reading on the extension cable or the reading on the HAS itself? Right now it shows different values on both.

Thanks ,what if I get the SNES adapter RGB sells, would that work with my SNES HD retrovision cable?

I just received my HAS 5.1, What's the pin out on the HD-15 video conector ? What's the easiest way to get component video out? Thanks

I finished programming the Ultra Simms, tested all the games and they seem to be running well.However all but one of the Simms failed the SIMM check . Is this normal?

I just received the programmer ,the last hardware piece I needed for the ultra simms setup.Are there any step by step instructions? also where do I get the files I needed? Thanks.

Got my CPS 3 Ultra bios cart label ,looks great! many thanks! @djsheep

Thanks!

I just got my order in thru HSS.I'm upgrading from the previous superbios Kit.Can I use that cartridge with the ultra bios kit? also,how do I program the games on these new simms?