Recent content by misteraddons

You'll need to find a micro USB to USB A cable. Otherwise it should be the same.

Not for MiSTercade V2. If you want to dive deeper, check out the manual linked at the bottom of the product page on my site :)

I just changed direct_video=2 yesterday in anticipation of a new main mister release. You can change it back to direct_video=1 for now.

These are the settings that worked for my ZULU2SCSI. No external power needed. Named the image “CD1.iso” and put it in the sd card’s root. Hope this helps someone.

There were 2 separate fixes for early MiSTercade V2 models: 1 for ringing on certain monitors and the other for brightness. I'm happy to tackle the mods for you if you want to send it my way. Contact me on my site if you'd like to do this :)

Thanks for the positive feedback :)

Working on MiSTercade V2.1 now. No plans for USB C. The MiSTer Pi has a USB A port, not a USB C port. There's no way to make a nice adapter for that. You'll want to use a short cable.

Yes, 3.3Vpp RGB amplitude, just like the MV1C.

I forgot to remember! Not sure how I managed to miss this key detail.

I would say to try it as is. If it looks dim, do the 3 resistor removal brightness mod. If you see ringing, then the latest mod will fix it. I don't think I've seen any issues with K7000 but maybe I'm mistaken.

I'm not aware of any issues with MiSTercade V1 JAMMA video. At the risk of coming across rude, have you adjusted the video levels on your cabinet? I've found that people adjust their cabinet for a raspberry pi setup, then put in MiSTercade and think something's wrong. Typical arcade video...

Thank you! Sadly, there's no getting around customs. Someone has to pay them, whether it's the reseller or the customer. I'll keep looking into solutions but I don't have anything immediate.

Problem solved! This should have occurred to me sooner, but I wasn't able to reproduce the visual noise issue on my MS8-29 chassis. Solution: Replace these 4 resistors with 220 ohm 0402 resistors. Background: MiSTercade V2 has a slightly modified video amplifier stage compared to V1.3. The...

I'm working with @Astro_jamma to see if I can figure out the issue some users are having with the video quality. I've done extensive testing and can't really see what others are seeing. So far, it seems to mostly affect Blast City cabinets, but some issues with MS8-29 chassis as well. I've...

I'm not on AP much. If you have issues with your unit, please email me on my site. I recommend starting with the resistor mod - I can do it for you if needed. This affects the contrast. It modifies buttons 5 and 6 for both players (pins 26 and 27 respectively). In the "JAMMA+ ON" position, the...