Recent content by MisterSpooky

  1. M

    CPS2 I/O Interface

    Pretty sure the solution is to remove the I/O interface and use a supergun...
  2. M

    CPS2 I/O Interface

    Here is the CPS3 branch of the AV interface: https://github.com/marqs85/cps2_digiav/tree/cps3 Readme: https://github.com/marqs85/cps2_digiav/blob/cps3/README.md
  3. M

    FS Arcade-Projects Jamma extension cables

    Got my cable a couple of weeks ago. Finally used it last weekend, great quality.
  4. M

    CPS2 I/O Interface

    Was going through the parts list on OSH Park and found that TME is out of stock on the C&K switch. There is a similar switch made by NINIGI and am wondering if it would be a suitable replacement? C&K https://www.tme.eu/en/details/js202011aqn/slide-switches/c-k/ NINIGI...
  5. M

    FS Arcade-Projects Jamma extension cables

    Are the cables you currently have in stock after completing the pre orders?
  6. M

    PARSEC Supergun Project

    First was measuring from the supergun then I measured from the board after you suggested it. Jamma Voltage Measurement https://imgur.com/a/aGQujWm
  7. M

    PARSEC Supergun Project

    Measuring from the board gives the same results. Could this be happening since the -5v regulator is drawing power from the 12v supply? In any case, if the 12v is for audio I'll just let it rock. Now to see if my old LCD can give me video lol.
  8. M

    PARSEC Supergun Project

    Measure Points https://imgur.com/a/v0AiOeI Asking because reading the instructions it lists the +12v range should be 12.0-12.2.
  9. M

    PARSEC Supergun Project

    Got my parsec in and after connecting it to my cps3 the 12v came to 12.3 which is out of spec. I'm using a brand new 600w power supply, any idea how to troubleshoot this? https://imgur.com/a/imhJeL1
  10. M

    FS Arcade-Projects Jamma extension cables

    Put me down for a 60cm as well.
  11. M

    UD-USB Decoders

    Could either of you provide links for the DB-15 connector that you used and a wiring diagram?
  12. M

    FS Sega Naomi Netboot (In parts)

    Is this kit still available?
  13. M

    A Bit Overdue (Hola From Central/Eastern WA)

    (official) Greetings everyone! Joined the forum a little over a week ago because a few weeks before that I finally decided to build a supergun setup. For the past few years I always thought about making some portable arcade setup (or buying a full Project Justice cab) because I never got a...
  14. M

    PARSEC Supergun Project

    What kind if timeline should I expect if I went on this waiting list? Just bought my first board and am wanting to get a decent supergun as soon as possible for a tournament we're organizing in our area. :)
Back
Top