Recent content by mmartinezespichan

Please, could you share photos of the mod? I`ll want to take as a reference

In my experience with voltage. On three of three pcb cps2, the video started to present issues(waves). When I set the voltage to 5v, all the issues disappered.

Thanks to all, I fíx the problem, the steps I did: - Short exc5 - Short exc1 - the fan was dead, i change it - the power was at 5,07 volts I set to 5 volts And thats it, the second board is up and running, I hope I help someone

Hello, sorry I new, how do I “short” the EXC5? For information: - I have a multimeter - I had removed the battery from the board.

Hello Undammed, I had recieved my eprom reader and I had read the rom 3 and 4, and later I identified the roms usind mame rom ident and the roms matched with sfz2h. I don't kwon what more to do :'( Please, help me with some ideas.

For the last response, yes, the game is ok, but the picture is very green. Is anything that I can do?

Hello Undammed, Antother question, for the other cps2 board(sfa usa-version), I had revived it but the game is working shown all in the video on green. I removed the resistor, as the video said(youtube installation), this can cause the issue? Also, the board was dead when I did the procedure...

Hello, The board was working when I did the installation, no issues with battery. I'll try all the SZ2 codes in order to check if some of that works, I hope to revive the board. I also bought yesterday a eprom reader but it'll arrive in one month. Also, my board is 4 version but I tested...

Hello Undammed, I bought two chips, I revived one cps2 ok(I have an issue with video that the output is green, but I'll check later), but my other board still broken. I don't know if I did something wrong, I used the encryption code for sfz2h(My board is orange, the game is "Street Fighter...