Recent content by mrmv

Those were two different cfs so two different sectors Thanks

Hi, i solved the problem Anyhow the main problem were the cfs, the one i purchased on eBay are shixt Now everything works and can do cfs by myself Thanks everyone for your help

My sector should be 0x3036

Yes with the program I take the picture of what i am getting as sector

i rewrited the cf from zero burned the chip from first post but i still get error 26 It loads 3 times and then gives error 26 So with same naomi same bios same security chip and same dimm i tried to load the game club kart special via netbooting and the game run without any problems Can the...

now i get it, i must write the cf using a normal cf to usb adatper not the same adpater i used to read the ID sector it seems I have been able to write it, now I test it C:\>gcfi -r -p -s 0x3434 -d v:\ -l ABC.BIN -g ck.bin os version : 10.0 (19045) logical drive : v:\ physical drive: 3 size...

cf is connected to my win10 pc with startech pcie to ide adapter + ide to cf adapter the same one i use to connect cf to net dimm but without ide to gd rom socket adapter I have been able to detect cf and read ID sector without any problem with your tools

this is the line I run: C:\>gcfi -r -p -s 0x3434 -d e:\ -l ABC.BIN -g ck.bin sector is ok and e: is my cf

ck.bin is the game i always use with netbooting, it works with netbooting

@rtw C:\>listphys.exe Device Name Size Type ------------------------------ --------- --------- \\.\PhysicalDrive0 512 MB Removable \\.\PhysicalDrive1 1.0 TB Fixed \\.\PhysicalDrive2 1.0 TB Fixed C:\> thanks for your help

or maybe should i use this CGFI version?

C:\>gcfi -r -p -s 0x3434 -d e:\ -l ABC.BIN -g ck.bin os version : 10.0 (19045) logical drive : e:\ physical drive: 0 size : 488MB sector size : 512 gcfi: command error, not allowed to modify master drive: 512 I get this error, should I set my cf adapter as slave?

I purchased this StarTech.com Scheda Adattatore Controller PCI Express IDE a 1 Porta https://amzn.eu/d/j6dQ02T The cf to ide adapter you pointed i have

Thanks Can i modify the cf without rewrite it from zero? Or can i get the cf id from this cf? Because i don t have the adapter to read the sector

This is what inside cf