Recent content by Murray

  1. Murray

    Specification of the Taito Type x4?

    TTX4? They aren't that cheap. TTX3? Now those are very available and not too expensive. They are a beast for emulation and running other systems. It's amazing how good the hardware on these runs arcade systems. They also come with JVS and FASTIO support in every machine. Upgrade the video card...
  2. Murray

    Specification of the Taito Type x4?

    USB Only. There's 4 COM port headers on the motherboard, but afaik they didn't get used on any games. I could be wrong though. I have an X4 with the drivers installed for the IO, but it's really strange trying to extract them from the image. It's also running Windows 8, so it's possible the...
  3. Murray

    Type X3 video card and CPU upgrade

    Damn, that's a high card. Looks like you won't even get the case lid on with that power wire as high as it is, and you'll have to remove the card bracket from the lid i think. If it were me and i was using that card, i'd just leave the lid off the case, and stick the IO board somewhere else...
  4. Murray

    Type X3 video card and CPU upgrade

    There is a small amount of room there to fit the card, but by the looks of it, that card will be a bit too high i think, but until you try it you won't know. You might be able to leave it there loose on an angle, loosely screwed in, but you will need to make sure there's something insulating...
  5. Murray

    Type X3 video card and CPU upgrade

    That specific card also has a NON EUFI bios, providing it's the 4GB model. https://www.techpowerup.com/vgabios/131411/evga-gtx680-4096-121030 https://www.techpowerup.com/vgabios/128658/evga-gtx680-4096-120716
  6. Murray

    Type X3 video card and CPU upgrade

    That EVGA card is going to struggle for clearance with the IO board though..... Just sayin! You might have to mount it differently. See how you go. This section right here is where your daughter IO card sits in the case.
  7. Murray

    Type X3 video card and CPU upgrade

    Yes you can, i use them with one of my cards. I just try to find cards that have the 6 pin power connectors because it means i don't have to spend more money on adaptors! It will run fine with them though, the PSU should have enough wattage to drive any 680 card and the rest of the system. I'm...
  8. Murray

    Namco Exceleena 1 + 2 cabinets.

    @hatmoose Thanks also for posting all that info and the manual link. We've created a nice repository for Exceleena info here for any owners and future owners. The more the merrier. My blue Exceleena is still my fave out of all my cabs. I'm going to edit the first post with some shortcut links...
  9. Murray

    Fast I/O PCBs

    I have a K91X1234A board, does anyone know if they support 6 buttons? I have no harness to test it with at the moment. It's not the 1243A model you guys have been talking about, it's actually listed as 1234A
  10. Murray

    Australian Roll Call / Registry / Deals Thread

    If it was local, i would have grabbed that for a project. They're a nice project to restore, lots of work needed on some. That one just looked like a nice base. You can't buy these anywhere near what you used to be able to. Especially as a 6 slot... and yes they get costly to bring them back...
  11. Murray

    Australian Roll Call / Registry / Deals Thread

    How much was it? The ad doesn't show anymore.
  12. Murray

    Australian Roll Call / Registry / Deals Thread

    That Neo 6 slot is nice. They don't come up for sale much anymore. It looks largely unbutchered, would be a great candidate for a clean up.
  13. Murray

    A Freeware Taito TypeX2 Multigame.

    I don't know how to fix the issue, but if you plug a PS2 keyboard into the unit, when this happens, you can press ALT+TAB and it will bring focus back to the menu window again. I've found that if you just tap the exit button combo and release it really quickly, this happens less. So just...
  14. Murray

    A Freeware Taito TypeX2 Multigame.

    If you alt+tab on a keyboard, it will bring focus back to the menu. I've had this issue before, there is a directx window behind the menu window that sometimes takes keyboard focus, you can't see it but it's there. What IO are you using? JVS or FASTIO?
  15. Murray

    Usb IO PCB K9101258A ??

    That's a Taito Type X4 USB IO. They have a 64 pin connector. The TTX3/FASTIO have a 60 pin i think from memory. Not compatible with TTX3.
Top