Recent content by N10248

The VMU is simply connected to the original joystick's PCB, easiest way would be just leave a regular controller inside the cabinet connected to port 3 or 4 of the dreamcast with a vmu plugged in to it.

I run mine offline but use a regular Windows 8.1 install and run the game files using pd-loader: https://github.com/PDModdingCommunity/PD-Loader There is an alternative online service that can be used but not sure if it can be mentioned on here. If the person who runs that reads this maybe send...

This is what I did with my NNC cabinet...

This page goes into detail of each models specs... https://github.com/shizmob/arcade-docs/blob/main/sega/boards.md

Just tried to email him about getting one but it bounced back, as mines a bit rough.

Ooo, mine has them rear japanese warning labels too. definately made from two different cabs...

Mine was made from a couple of other cabs before I got it I think, possibly the screen casing sourced seperately as the screen was replaced by someone and some of the steel mounting plate in the back has been cut to fit it, even the rear wheels are not the original ones. Plus when I got mine it...

Pretty sure my upright's screen came from a Japanese sit down one as it has the faint mark from where the 1P sticker was and has the Japanese epilepsy warning sticker which I've never seen on euro ones...

I recently had a TDK SSD from a Sega ALLS that had this error and even low level erasing tools wouldn't fix it. However I managed to get it working again by putting it in a HP PC which has a secure erase option (many modern PCs will have this option) in the BIOS, this took about 20 seconds and...