Recent content by Otheym

Glad to hear of success on Rev 3/4 boards. I tried many things but eventually gave up and burned unencrypted Roms for all the boards. I never tried removing the ROMS as suggested but I did try different PSU's. My Arduino cables were a bit long, that coupled with the longer traces mentioned by...

I tried all the old memory I have and can add the following to the list as working: Infineon 256MB HYS64V32300GU-7.5-C2

Mitsu- Your suggestion got me thinking, I never tried swapping the memory in all my troubleshooting. Just swapped out the memory with some I know worked before, and the games load now. Since the Netdimm passed self test I thought the memory was good and did not consider it again. I guess...

Hello- I have a Naomi 1 Netboot setup that has been working fine the last month or so. I tried it today and games load, the memory checks fine then it reboots to "Error 31 This Game is not acceptable by main board" I have been using the Python Script so there is no Zero Pic. I have tried...

Got this board fixed. On PAL3 I disconnected the jumper from the solder side, lifted pin 9 and connected the jumper to it. Confirmed I had a good connection to C13 on CN3 and it worked. All sounds are perfect.

I was starting to think that my Arduino was the problem or that the pinout was wrong but then I tried a Rev 7 board and it worked the first time. That confirmed for me that the pins are correct (at least for my Arduino) and that it is working. I am also using the Sainsmart one linked in the...

I can't zoom in on the connector in that link, but from your description and what I can see is it something like this: http://www.allelectronics.com/item/con-244/4-pin-connector-w/header-0.10/1.html

At San Diego, Navy or Marines? I was in the Air Force for many years. Marvel Super Heroes VS Street Fighter was my first cabinet also. Welcome!

It is PAL G and a REV 3 board, the jumper wire on the solder side going from the PAL to to CN5 is there. The PCB itself looks to be in great shape, nice and clean, no obvious damage. Also I should be more specific, the sounds seem correct but playing at the wrong time. It likes playing...

A question for the Candy Guru's here: When I mentioned earlier I may have had some buttons, turns out I only have screw in type (regular Happ style). I see in the pics that Aero has push in type. What buttons normally comes on the Aero? Sanwa? Seimitsu? Where is a good place to source the...

Hello- I recently picked up an 'as-is, untested' B board for cheap. Plugged it in and find out it is an SF Alpha 3 Phoenix edition. The game plays perfect as far as controls go. However the wrong sounds play constantly as well as a weird 'beep' kind of noise. I thought this might be a...

Shaeri87- I have a Marvel Super Heroes vs. Street Fighter board I have been considering selling. It has been in my collection for 15 years and I just changed its' battery a couple of weeks ago. I also have a Motherboard to go along with it. Both are USA versions. Also have an X-men Vs. SF. I...

Welcome! I am also in the LA area.

Hello from another Southern Californian.

I am both glad and sad to hear I am not the only one that has had problems. I wonder what the differences were between those that had success and those that did not. Did certain regions work better than others? Certain games? Or was it random?