What's new
By:

PascalP's latest activity

  • PascalP
    PascalP replied to the thread Bambu Lab boiz.
    Yesterday I swapped out the standard Bambu textured PEI plate with a Biqu Panda Glacier plate and must say the result is quite good...
    • b4497d2c-2afb-4387-b257-6a0ea203aef7.jpg
  • PascalP
    PascalP replied to the thread Bambu Lab boiz.
    Not using an AMS at all at this moment on the A1 ;) But if I like the 3D printing hobby I see myself buying an P1S/P1C or something...
  • PascalP
    PascalP reacted to nnap's post in the thread Bambu Lab boiz with Like Like.
    I use the bambu stuff. When you order 6 rolls you get a big discount and once you have a few spools, you can get the refills which are...
  • PascalP
    PascalP reacted to Zepherino's post in the thread Bambu Lab boiz with Like Like.
    The cardboard spools don't work that well because of how light they are, which becomes a problem when the spool starts running low on...
  • PascalP
    PascalP replied to the thread Bambu Lab boiz.
    How do these hold up with the cardboard spools? Do they also work well in an AMS?
  • PascalP
    PascalP replied to the thread Bambu Lab boiz.
    Thanks, I'll put the mentioned brands on my shortlist and see which of these are even available in the Netherlands :)
  • PascalP
    PascalP reacted to Robertguy09's post in the thread Bambu Lab boiz with Like Like.
    I stay away from cheap, random brand filaments now days. I had too many bad experiences with them being brittle, causing clogs and...
  • PascalP
    PascalP reacted to West's post in the thread Bambu Lab boiz with Like Like.
    I like Overture as my go to inexpensive PLA. It’s a good price and prints really really well for me.
  • PascalP
    PascalP reacted to Zepherino's post in the thread Bambu Lab boiz with Like Like.
    I'm not a fan of eSun PLA. In my experince the filament tends get pretty brittle towards the last 25% of the roll and snap mid print...
  • PascalP
    PascalP replied to the thread Modeling software for 3D prints.
    Make that 5 years by now :D
  • PascalP
    PascalP replied to the thread Bambu Lab boiz.
    Just joined the club with a Bambu Lab A1 printer (without AMS), thought dipping my toes in the water first before spending lots more on...
  • PascalP
    PascalP replied to the thread Tekken 2 / Namco System 11 - Recap.
    No idea, the board was like that when I bought it. Not sure if that is how it originally should be or not?
  • PascalP
    PascalP reacted to Robertguy09's post in the thread Arcade PCB 3D Printed Cases! with Like Like.
    First prototype for the spit case design for a gnet! (Printed in all my random scraps lol) I think I over did it... This thing is a...
  • PascalP
    PascalP replied to the thread Tekken 2 / Namco System 11 - Recap.
    My what adapter?
  • PascalP
    PascalP reacted to Robertguy09's post in the thread Arcade PCB 3D Printed Cases! with Like Like.
    I'm happy to share and happy that people like my designs :) @xterc @Scarletspeedstr and anyone else, if you print any of my designs...
Show older items
Back
Top