Recent content by ptom98

So have finally got a CPS2 (Vampire Saviour 2) and it’s working great, BUT the kick harness is really short so messes with my setup. Noticed that with the HAS I can feed it into the JAMMA board and the instructions manual says just to cut the paired ground on the back of the board. Happy to do...

Was just wondering if anyone got the Capcom controller working with Mahjong arcade boards? I knocked up a quick breadboard a month or two ago, using it to control Poker Ladies, but as that's poker uses way less buttons. I'm going to try and knock something up over the week to work with all the...

Nice to know, thanks! Was looking at these but wasn't sure if they worked or not. Was wondering about the speaker, do you have it set to GND?

In the process of making my own, but just wondering if anyone has a JAMMA adapter for this?

So I was bored over the weekend and repaired the issue with the broken cbox. Ive wired in an arcade power supply into it and am now able to get a decent 5v through it. 👍🏼 Not planning on using it for regular usage, just for testing. Just wondering if there's anything I need to be concerned with?

Having an issue with my Moonwalker Bootleg PCB with it recognising Fire 2 for both Player 1 and Player 2 as both on/pressed. Still learning how to do repairs so any pointers would be really appreciated. I've gone through what I've done so far below; 1. I tested another game to rule out the...

So I recently bought a RetroTink 4K to handle the video output from my SuperGun. Im really enjoying it, however I'm having some issues with a couple of boards that refuse to display but previously worked fine on my OSSC. 2 bootlegs (Moonwalker and Drift Out) and Football Champ. Drift out...

Yes, with it connected. So, have managed to get it working, but not to sure if it means the issue is elsewhere and the level of -5v is fine. Tried it on another SuperGun and it worked fine, checked the -5v and that was lower, in the -4v. BUT I use it with my NeoGeo and that has the switch on...

I was literally just reading up on this! I feel reassured I'm on the right tracks now that you've also mentioned it. :D

Having an issue with a Raiden bootleg board on my SuperGun (HAS 4.2 with a RT 125-A PSU) no sound and intermittent crashing. I've been told that it worked in a cab and it's potentially the SuperGun that's the issue with it not supplying -5v Having done a quick test at the JAMMA edge I can see...

no issue with it, it's all good. got a cover over the screw terminals and nothings exposed. just sods law lol

Just wanna thank everyone for pushing me to get the HAS, got a 4.2 today and so far it's great, although I'm sure the power supply for it will literally kill me one day 😅 I'll be keeping an eye out for when the v5 is back in stock for sure. Decided to upgrade from an OSSC to a RetroTink as well...

Is Poker Ladies still available? Do I need an adapter for controls?

Thanks everyone, going to wait for a HAS have put the feelers out to see if anyone has one (or a mini gun) whilst I wait for a restock

I'm more than happy with a v4 version. Send me a message if you do find it :D