Recent content by raynex

From my experience, it is drop shipped directly from China, so whenever they get the order, you should get the tracking soon thereafter if they have it in stock. Takes about 2 weeks (for me anyways) to get to your door.

Bump. If anyone is interested, please DM me on/before 9/17. I won't be able to ship any for a month at least; probably into November.

It's the same PCB. Been converting between NBA Maximum Hangtime, UMK3, and WWF Wrestlemania on 2 boards. It's all just EPROM swaps.

Just wanted to update you that I did get the memory, installed it, tested it with the multi and couldn't get it to work. I figured it might have something to do with not burning the 322's correctly cause the way the files pull up in Xgecu and GQ's software are different. GQ's seems to be byte...

Is there any specific settings needed for the 322's to program each one? The buffer in the GQ 4x4 software shows something different than Xgecu. It looks byte-swapped, but I'm not knowledgeable enough to know how that will affect burning the EPROMs. Other settings I don't know...like are...

Console5 wiki has a list. https://wiki.console5.com/wiki/Capcom_CPS1

I didn't think this was possible but when the MicroSD card fit through one of the openings, my mind raced to find a way to make an externally accessible MicroSD mount, so this is what I came up with. It's a combination of a TPU bezel print and PETG backend brace and support for the extension...

Finally got my Multi installed in my CPS2. Beautiful all around. CPS2DigitalAV works beautifully. Finding an adapter that fits that tight space was difficult. Some tips if you're buying new and may have the same experience. 1) Key writing cable...not included, so if you intend to use...

I didn't like how the CPS2DigitalAV was entirely supported by the 2 pin headers so I made a mount to relieve some of that pressure. It's really solid and uses the one screw to really hold it down, but you can be the judge if you install this. Let me know...

These are the ones I already have. If there is an angle missing from this that you need, let me know.

I recently bought a GQ 4x4 IC programmer and it came with the 48 pin adapter. This thing allowed me to program 322's without file splitting or needing a bigger programmer, so that was a win for me. One caveat...the adapter is heavy and puts a lot of pressure on the ZIF socket cause it's...

I can test that. I ordered the memory and will get the board prepped while holding off on the second bodge. Appreciate it.

Thanks for the reply. So, I've spent much of the day trying to see what I need to do the full conversion and it looks like I just need the larger ROM, move the R31 to R30, change some jumpers, and add the second bodge on the back. You think that about covers what needs to be done?

That's awesome to see. I've updated the OP to show the remaining quantities and color availability. Once these are gone, it'll be a while before I even attempt another batch. Not even sure I can but I will have to see what the ATX-like cables cost now.

Sorry to Necropost this, but has anyone seen this board pre-modded before? It's like 90% of the C2 conversion blog completed from the looks of it, but It also looks factory cause of the custom populated IC 315-5296. Intention was to do a C2 multi on it, but jumper config doesn't match this...