Recent content by Roch

Thanks but today I don't have the cartridge anymore.

For my part I tested two superguns, three slots (two MV-1FZ then MV-1B) and four power supplies including that of my capkited BLAST and a Mean Well RT-125A but the problem was still there.

This is my video, unfortunately I didn't find a solution.

Thanks, great job !

Well done!

For me it's normal on this game. All the MK1s I've tested have this if you look closely. And this phenomenon is also present on one or two other maps (I think).

Indeed, after that it's the wiring that makes the difference. On certain cab we switch from one to the other via an AMP connector.

5.3v is too much in my opinion. Test between 5.00 and 5.05.

To exit Arcade Protect Mode, have you tried holding TEST + A + B + C when starting the slot? Or just A + B + C after setting dipswitch 1 to ON?

Yes, you must actually put the files at the root of a folder like "homebrw1", "homebrw2"...

Indeed, 5.4v was really too much. By dint of doing tests, at one point I had this kind of problem of a crazy screen with corrupted sound. To start, I think it's better to use an original bios and here is the protocol that I used to get out of it: Remove the cartridge. Format the SD card and...

This one → https://www.axunworks.com/product-p125502.html

I am sincerely sorry to have to contradict an authority such as you, this information that comes from the official manual (which is why it is often mentioned) is false (errors in manuals happen). I think there are people much more competent than me who will be able to take measurements to...

It happened to me too on MV-1FZ with original bios.

Hi, I received my cartridge today. Here is what I have noticed so far: Small glitches on the list of games when scrolling (nothing serious). MV-1FZS with or without battery, and unibios 4: KOF'03, crashes more or less quickly after starting when you modify the game settings beforehand (in...