Recent content by Shakunetsu

Sweet, glad to hear it!

Posted a topic about this here: https://www.arcade-projects.com/threads/monitor-seminar-by-rick-nieman-kitchener-on-canada-near-toronto.35115/ Please discuss there to keep conversation consolidated. Thought it would be helpful to share in the monitor help forum as well. Please let me know if...

Love the execution on this idea, thank you for coming up with it! Will send you a PM.

The cabs are all in great shape and Tony's a gem and a pleasure to work with. :thumbsup:

I got my FTDI programmer today and experienced the same issue - then I noticed the serial pins on the arduino are not actually connected to the corresponding pads on the custom PCB at all, I guess because this version has the arduino on top of the USB host shield rather than directly against the...

I've got mine working! I think I fried the one I fully desoldered, but once I had it open and could get a better look at things, I figured out a way to run that 5V jumper without taking them apart, and it worked well on the other 3. It will require a soldering iron with a very fine tip though...

I do. I managed to desolder mine with some chip quik and a heat gun that was definitely overkill for the little guy and ended up also blowing off the usb connector and pushbutton :facepalm: I found that they did cut the trace on the usb host shield as instructed on the github, but didn't wire...

I complained to the AE seller and he confirmed that I'd need to run at jumper from JP2 to the 5V via on the usb host shield to get it to work. My first crack at desoldering the thing didn't go very well and I'm not about to invest in a hot air station or vacuum iron so... I'll give it another...

Yup, and the db15 connector has screw posts instead of screws which I had to remove so the metal plate fell off lol, minor annoyance. Taking a look at this section from the USB2DB15 GitHub, it looks like the steps to provide 5V to USB might not have been followed. With the adapter I received...

I actually just ordered 4 of those aliexpress ones and mine doesn't work either lol. I sent a message to the seller and was also planning to get a programmer and try flashing as well. I also noticed my stick doesn't receive power from it. Please keep us posted on how it goes and I'll do the same.

+1 for @msamiullah Bought a CPS3 that's been kept in excellent condition, very responsive and accommodating, picked up locally, was nice meeting you!

Necroing a very old post, but just wanted to update that the problem was some of the PPU legs had lifted and after soldering them back into place the board is working great! :D Thanks again GoldenGlover, your comments here were a big help in understanding the issue.

Hey twon, I asked about the NACs in the FGC Discord. Just wanted to drop a post here to stay in the loop. I'm in the downtown Toronto core. If all looks good I'd be interested in 2 NACs and 2 stools. Thanks for making this happen.

Fingers crossed, thank you very much!

Here's a photo of the back! Noted - I may or may not actually attempt that myself, SMD soldering is not something I'm experienced with... I let it run about 15-20 minutes and it never got alarmingly hot - stayed about the same temp as the other 4 chips around it!