Recent content by sk8er000

  1. sk8er000

    Retro Hardware Capacitors LISTS

    Maybe someone before you already recapped the board partially but with different values, can you see if the solder joints are from the fabric or not?
  2. sk8er000

    Retro Hardware Capacitors LISTS

    Added: Jaleco - Mega System 1 (Type A) Technosoft - Double Dragon 3 - TA-0030-P1-04
  3. sk8er000

    Jaleco Mega System 1, testmode?

    The p1 button 2 was always pressed due to a broken JK-03, I've bought and installed 3 repros from @caius and now I'm able to pass the screen by pressing p1 button 1 and run all the tests!
  4. sk8er000

    Jaleco Mega System 1, testmode?

    I got this board today and trying to figure how to enter in the test menu to see if everything is working (the game seems to run fine from the attract mode). I've tried some combos at startup but only holding the service button I get the squares pattern but nothing else. Am I missin something?
  5. sk8er000

    My F3 sometimes doesn't power ON

    sorry for the late reply. I've used panasonic and nichihon for the recap. I've tried to move a little bit the potentiometer and now it seems to boot every time (need more tests but tried to boot like 10 times, one every 10 minutes and it always booted)
  6. sk8er000

    My F3 sometimes doesn't power ON

    I'll try to measure it but it has the glue on it, (don't know if it's present from the production line or not). I never touched it since I already knew that wasn't an audio potentiometer when I bought my 1st f3.
  7. sk8er000

    My F3 sometimes doesn't power ON

    Hello, I'd like to ask if there is a possible solution for a long time problem with my F3 setup. I have a recapped Taito F3 motherboard with the multi that sometimes if I power it up it does nothing (no fan spinning, no video, nothing). If I discharge the board and the PSU (without changing any...
  8. sk8er000

    New Namco System 1 Multi Instructions

    I've tried the known games with swapped sounds and they seem all correct to me thank you @Darksoft
  9. sk8er000

    Namco NA1/NA2 Repair Tips

    I want to share this little repair log since I was finally able to fix my headphones audio on my NA2. First thing I swapped the potentiometers with the ones suggested by @Hammy and the old ones were very very rusted. Unfortunately with the new potentiometer the HP audio wasn't still back. Next...
  10. sk8er000

    New Namco System 1 Multi

    of course not for a signle recap I was talking about big quantities compared with other ones. I had good experience with elna audio rated capacitors too
  11. sk8er000

    ZN1 Bios board arrives!

    Ok, thank you very much for the clarification :)
  12. sk8er000

    ZN1 Bios board arrives!

    I'm sorry but I was misunderstood I don't mean the gnet games. But since the gnet is composed by 3 PCBs and the main board is a Sony ZN2 (if I'm not wrong) I was asking if the mainboard can be used with the proper romboard for a future product from you :)
  13. sk8er000

    ZN1 Bios board arrives!

    Just curious, but the ZN2 found on the gnet will work with that?
  14. sk8er000

    New Namco System 1 Multi

    Found them they should be UFG series from nichicon they're freaking expensive but it seems to be an even higher series, the UKZ series =O
  15. sk8er000

    New Namco System 1 Multi

    if you have the model or the mouser part number I can add them to the capacitor list as option :)
Top