Thanks for the information!
I ended up purchasing a new power supply before I retested the current power supply to make sure I was checking for correct power out of the lines. After a retest the marquee and screen lines had power, and I have since pulled the panel off the marquee and the light...
After going back and tracing what I was doing When the monitor went out I realize that I did hit the degaussing button for sure once possible a second time. Stupid me.
Hope to have it back up and running soon or replaced.
Update:
Just double checked power and getting AC of 120 out of the monitor and marquee lines.
This tells me that something is up with the monitor and possibly the bulb of the marquee may be popped. I took it out the other day and didn’t see anything that may have lead me to believe the bulb...
@nassekova and @nem I will be confirming power readings and checking things out in the power supply this week as soon as I have time.
Would the tick in the monitor still occur assuming I took accurate power readings and there was no juice from the PSU to the monitor?
Quick update that I tested all three power sources coming out of the power supply (monitor, marquee, and Game board).
The line powering the game board is receiving 5V power. I checked At the controls and receiving 5V to the joy sticks, so seems like power is moving through that line no...
I appreciate you’re reply!
Picking up a multimeter today and will report back results. the chassis has two stickers: PVG/Semco and another that says Sharp Image repair/service and number (I assume this is a repair co.).
Hello Everyone,
I am new to arcade machine owning and have been trying to learn a lot about how it works. Long story short I have a NAOMI MVC2 machine with a VGA monitor, which I had hooked up a Xbox 360 and PS3 using a VGA switcher. Everything was working fine and I was hooking up a capture...
@BroadwayJose It’s a 27” VGA monitor. Hopefully the attached Info on the image helps. Also, don’t mean to get off topic here so feel free to shoot me a PM if you feel that it’s an appropriate answer to message. Thank you in advance!
It’s a MVC2 cabinet. I am going to keep watching this thread to and see if preorders open up again.
Thank you everyone for your help! New to this and trying to learn as much as possible :).
Thank you, @BroadwayJose. Appreciate the feedback. Would you mind pointing me to the SCART switch you are using? I only plan on using Xbox 360 and PS3, but would like options to connect maybe another 2 or 3 more in the future.