Recent content by supanova00

how do we order these guys? I cannot wait :) I have a Warriors of Fate that has been dead for years and my two Knights of the Round.

Awesome! Thanks xodaraP. I'll definitely be in line for 3 in that case. I have a Knights of the Round that recently suicided :( after all those years. The other 2 boards I have, have been dead for a while. I never got around to de-suiciding and now I'm goad I did put it off! Because this is...

I would be in search for at least 3 of these. x2 for Knights of the Round And one for a Warriors of Fate. Would it work for a Warriors of Fate 1.5?

Oh, no it's definitely a G already on there. Says G on the chip. But could it be an issue with that? because on this list I read regarding that chip... it says MSHVSSF is supposed to be an F?? but mine is already a G. What I'm wondering is could someone have done a shoddy replacement on the...

I was looking on line at a list someone had made of CPS2 PAL and Jumper settings. According to this list MSHVSSF is supposed to be PAL F. Mine is a PAL G. Did they make different games of the same name with different PAL? Could the problem I'm having have something to do with this? Do I...

Yes I'm basically lost to it now. No idea where to go from here. I've tried 2 A boards. Tried it on 2 different cabs. same result. desoldered the jumpers and resoldered.. same result either way. Have reinstalled the kit probably 10 times at least now. Confirmed no bent pins anywhere...

Ok so I have an update... I have desosldered all jumpers from 1 - 13. It looks like from 1 - 6 were already shorted factory. I didn't see the small connection in the cut on the pad previously, but now I can, so I shorted those for no reason :( So after a multimeter test... all the pads are...

I'm in Melbourne. Are you or anyone else down this way that could help me? I've spent hours on this and keep coming to the same result. Just on a side note... Trawling through the forum I found this https://www.arcade-projects.com/forums/index.php?threads/sound-issue.2801/page-1 This guy had...

Tried a different A Board and still the same issue. Also tried a complete resolder and same thing again. The only thing I can try now is another B Board if I'm correct? But I don't think I have another Rev 7 G.. :(

just metered all and they all check in good. What I did notice is that jp5 seems to meter weaker than the others. It's not a continuous beep and sometimes nothing at all until I get the multimeter at the perfect spot. Could that be a poor connection causing the problem or unlikely?

I followed that original instruction video. Here are pics. I put the solder blob on 1, 4, 5, and I think 9 and 11. The rest were already set is this the correct set up or are rev 7 boards different?

Ok this does sound like the problem. But the first 6 jumpers were all open. Correct setting should be closed, open, open, closed, closed, open right? Or were they to remain open?

The B Board has been dead for about 2 years. It was one I messed up a battery change on by not having a good solder on the new battery, and accidentally killed it. Sound had no issue when the board was working back then. Could the fact I originally killed it have caused the board to go bad in...