Recent content by TaintedOne

Looking for a fully working Naomi 2. I do not need a netdimm, pi, or psu as I already have all of these I use with my Naomi 1. If you have one of these please let me know.

PM sent

Looks like your pi came from the same seller I purchased mine from on aliexpress. It would not connect as well. https://www.arcade-projects.com/threads/how-to-net-boot-naomi-tri-force-chihiro-using-pi-force-tools.1086/ Page 33 on this thread has pics of the bad pi I purchased and pics of the...

Slide switch, makes sense. thank you!

Finally getting around to testing a Capcom I/O I purchased from Ebay a while ago and only getting sound out of the right speaker. The sound cuts in and out when I touch the volume adjustment knob and the knob also has some play in it. I am hoping this is the problem with the single channel...

That seems to have been my problem as well. I just got in a Pi from another seller and voila, it works. I'm sure most people on this forum have already set up networking on their Naomi years ago, but for those who are new to this like myself it can be frustrating. To figure out what was the...

Thank you guys for the help and suggestions. I believe I found someone locally who can do this for me. They just have to verify they have the correct chip for it.

I do not. I'm not even sure what the stock number is for it.

I am needing a zero key for my Triforce Type 1. Currently swapping the one from my Naomi back and forth. I would prefer not to cause damage to either board by swapping this out. Does anyone here have one to sell, or have the ability to write one? Much appreciated

I gave up on getting the pi to work. So I tried going the pc route with transfergame.exe and it works. At least I know the dimm board was not the problem. Thank you guys for the help! I will probably try making a new sd card for the pi when I figure out how to do it. Mechanics are my specialty...

I tried swapping out the sticks one at a time. Each of the 256mb and the 512mb from the other netdimm, no luck. I am starting to think the issue is the pi. While trying to connect to it, none of the network indicator lights on the board lit up. As a last resort I disconnected the pi from the...

Thanks again! I will try this tomorrow as well.

Yes, I have them both set to 192.168.1.2

The axunworks netdimm has a 512mb stick, but the standard netdimm has dual 256mb sticks. I will try removing one of the 256mb tomorrow to see what happens. Thanks for the advice!

The piece that fell out is a keyway or key stock. You can find assorted packs in auto parts stores or on Amazon. If you still have the old one you should be able to match up something close enough.