Recent content by talex-tnt

quick update, I found a way to fix my issue in this other thread which I already replied to. In short, I added IPA to the connectors and pressed the 2 boards together!

Helloo! it worked for me as well, thanks! I reflowed the pins of pretty much all the chips on the daughterboard with no luck, then I read here about pressing the 2 boards together.. So I put a generous amount of IPA on both connectors, reseated the board and pressed them together.. and it...

Hellooo @chacal231077, .. and that's exactly what happened :) it worked for a while, now I was testing again as I replaced the battery with a battery holder and it stopped working.. Luckily I have another one, but it is a different revision.. so motherboard and daughter are different (only...

Hi there! Quick update, just in case somebody else encounters the same issue: after recapping the motherboard the issue was fixed. I also recapped the cpu board but that changed nothing. After recapping I had to lower all the RGB channels to 0 from the display settings (had 30 before and...

Thanks, I’ll take a look over there then. Can I also ask you why dumping PLDs?

Ciao Alberto! Welcome :)

Hello there, thanks for sharing all this useful information! I also have a System 12 board with Tekken 3 that needs some work, but it’s still pretty new territory for me and I’m not sure where to start. It boots with very dark colors, almost black, and they slowly stabilize as the board warms...

Hi everyone, nice to meet you! I'm Alex, from Italy. I recently got into arcade systems and just acquired two CPS boards with Street Fighter II: CE and HF. I also own a System 12 with Tekken 3. I don’t have a cabinet yet, only a supergun, but I’m hoping to get one in the future. I’d like to...