Recent content by vesta03

Hello, I'm looking for a revised ms9-2930 for replacing mine. Best regards !

theses

hi team i’ve noticed something on the backplate , it seems that both « ground » connector are not installed , can it cause my issue ? i,ve noticed that the sticking paste is not applied on the 3 white pot next to the tht

ok i’ll receive a sega dreamcast to vga converter tommmorow i’ll be able to test it correctlt

i can’t find the potar hh31 in the scheme , is anyone know where is the hh31 on a blast city ? i’ll double check d the d switch with a metter

View: https://youtube.com/shorts/XccEkR3dLX4?si=pJUNCjA9RjI1-Xme

here is a quick video of the issue View: https://youtu.be/42I-7Z3Uo2g?feature=shared

hello guys, just ran some test if i switch from 15khz to 31khz just as the video of mr hide the screen shut down (i can hear a « clack » sound so i have no image but the sound is ok. if i reboot the blast switch and switch to 15khz i will have no image. i must disconnect the 220v behind the...

je vais recevoir un adaptateur vga dreamcast dimanche pour essayer… je n’ai rien d’autre à brancher sur le peigne jamma malheureusement…

no , i’m using the exact same configuration as mr hide in his video. a recalbox connected to the jamma , all switch are in off position to select 31khz to the jamma and i’ve no image . it does works with 15khz

wheb it works… apparently mine don’t at least with the 31khz…

i confirm , i have this one on my ms 2930

i have this one on my board

it is not an auto indeed… i have a manual one ms 2930 with the d switch. the only shoud i say problem here is that the switch only works for 15k but not on 31khz resolution as shown in yhe video of mr hide.

ok, i’ve already tested my laptop with a 480p rzsolution, windows detect the crt screen but nothing is dispplayed (all switch are off as in the video of mrhide) need to test a dreamcast but i need to order the vga converter from amazon first… hope i’ll find a solution :’(