Recent content by ZODIAK

For sure, thanks! I'll be on the lookout for one then.

@ekorz Do you have a link to where I can buy an FM1608 chip for this? Or is this something I would need to program myself? I really need to get a chip programmer one of these days

Wanted to follow up and let you all know I've solved the issue! So this board in particular seems to rely heavily on the battery. When I got the board from the seller it had an off brand 2032 battery. the battery did not sit in the board properly as it wasn't the correct size, and I noticed...

Hey @AlxUnderBase and @ekorz Thanks for the help! I was able to read the voltages off my board and off the Jamma edge successfully, I got a reading of 5.08V off the Jamma Edge of the board and 5.15V off the Jamma Harness. With this in mind, should I be lowering my voltages on the harness...

Also regarding checking the 5V under load, do you have pictures of how I would do that for arcade boards off a jamma edge? Sorry if thats a dumb question, but I've been told that a few times for a different ask before, I have a multimeter but I have not been able to check voltages properly as I...

I found this board while surfing the web, looks to have the same chips you mentioned as well as having the jamma edge. the only difference from this one and the cracked motherboard I have is that there are two additional chips on the right side near the ITVR-1 security chip. Curious if this...

Hey everyone! I recently acquired a Street Fighter The Movie board that I was hoping to use for an event. However, whenever I plug it into my cab I get a boot loop. This can be after a few rounds, or right when I turn on the board. It seems to be intermittent, and looks like its caused from a...

Looking forward to the upload! I am most interested in the a-cho move strip but all the others are really cool as well!

PMed! Also updated my thread and title!

Hey everyone! Thanks to everyone that reached out on my last thread, I ended up finding almost all the games on my original list! I wanted to create this new thread to list down some of the games I've had a harder time finding, in hopes of one eventually coming up. - The Outfoxies - Jackie...

Wanted to ask the same question, but for just the Exa motherboard by itself. Would you be willing to split it up, and if so how much would it be? Also in the US

This is awesome! I really like that the CPS3 case matches the same style as the CPS2 case, i might need to pick one of these up someday!

@Old baby All good, i ended up finding some from someone here in the US, if i do ever get any CPS2 boards for you I will probably ask to include them. Thanks for the replies!

PMed!

Hey everyone! Curious if anyone knows where to find the metal clips that are used to push the A and B board together for CPS2? Or if not, is there any readily available alternative solution to connect them with the cases on? I was able to get my game working when I removed the case but I would...