What's new
By:
Filters

Connector for this super gun’s power?

V

VenomXL

Enthusiast
Joined
Apr 9, 2021
Messages
183
Reaction score
66
Location
US
Looking for what type of connector this super gun I grabbed takes… looks like some kind of molex connector maybe?
 

Attachments

  • 1E7B5E3E-0E67-4B90-8D3B-5D188BD0247D.jpeg
    1E7B5E3E-0E67-4B90-8D3B-5D188BD0247D.jpeg
    87.1 KB · Views: 116
+1 for JST V series. Neither mouser nor digikey stock v-series.
You can buy the housing in a pack of 50 from RS components here
But the pins are discontinued here
 
Nope. Not JST. It’s 4 prongs, not 5. Similar size after double checking though.
 
Yup, the idiot that sold it to me showed me a picture of a Jamma edge and told me it would help. Then he told me that I’d need a power supply to connect it. I’m guessing I’m not getting any help from him. Fml.
 
I’d just solder in your own power harness/molex adapter…
 
Probably what will end up happening. I saw some single pin molex adapters in a photo the guy provided that I’ll try first.
 
VenomXL said:
Nope. Not JST. It’s 4 prongs, not 5. Similar size after double checking though.
Click to expand...
RGB and Hatmoose pointed you to the correct connector.

1653015575858.png

This is what it looks like to me that is on that PCB.

So you need the following:

1 piece

1653015797467.png


4x pieces, but I would get some extras
1653015869279.png


I suggest using 20awg wire which is the maximum gauge that the connector can use.
 
Those are it. I’ll start digging for where to grab them! Thanks so much!
 
You must log in or register to reply here.
Back
Top