duffcon
Professional
Still here bump
FS 19" & 25" K7000 Chassis for sale - Fully Rebuilt and working
- Thread starter duffcon
- Start date
For Sale
duffcon
Professional
duffcon
Professional
Bump for 19 & 25" available. $300 shipped.
duffcon
Professional
25” out of stock. 19” remains.
duffcon
Professional
19” still here. MMAO
duffcon
Professional
Bump for 2x 25" available. 1 chassis fully rebuilt as all the rest here. asking $325 shipped.
Also have another 25" chassis I got in a lot that appears to have been serviced pretty well. The caps are a hodgepodge, some nichicon, kemet and others, but the date codes make me believe it was recapped around 6 years ago. The bipolar caps appear original. Most of the trace repair is adequate, not my style, but it works. The flybacks looks new. I checked the power section and everything was fine so I fired it up and it works with a very nice picture.
kind of feels like a waste to reap it as it's working well. I did go through the chassis and reflowed the input header, yoke header, and some various other things as needed and cleaned it. I also replaced the fuse as it was the wrong value and installed a new DAG ground wire as it was missing.
Verified the B+ and shutdown pot as it was new.
Given I didn't have to replace anything I'm gong to let this go for cheap, $250 shipped.
Also have another 25" chassis I got in a lot that appears to have been serviced pretty well. The caps are a hodgepodge, some nichicon, kemet and others, but the date codes make me believe it was recapped around 6 years ago. The bipolar caps appear original. Most of the trace repair is adequate, not my style, but it works. The flybacks looks new. I checked the power section and everything was fine so I fired it up and it works with a very nice picture.
kind of feels like a waste to reap it as it's working well. I did go through the chassis and reflowed the input header, yoke header, and some various other things as needed and cleaned it. I also replaced the fuse as it was the wrong value and installed a new DAG ground wire as it was missing.
Verified the B+ and shutdown pot as it was new.
Given I didn't have to replace anything I'm gong to let this go for cheap, $250 shipped.
Alfredo_CRG
Student
Hi do you have any K7000 for a 19" monitor ??
duffcon
Professional
Yes sir, I have a 19” K7000 ready to go, fully rebuilt as seen here:
Post in thread '19 & 25" K7000 Chassis for sale - Fully Rebuilt and working'
https://forums.arcade-museum.com/th...fully-rebuilt-and-working.543877/post-5119774
taco_cherub
Beginner
could you do 300 and i pick it up from you in concord?
duffcon
Professional
@taco_cherub PM me if you still need a chassis.