hocuslocus
Beginner
I've seen Marquees everywhere, has anyone seen a tekken 5 cpo? Wanted to replace mine it's a bit yellowish looking.
been looking on and off for like 6 months.
been looking on and off for like 6 months.
tekken 5 cpo art?
- Thread starter hocuslocus
- Start date
Kaelan
Student
Following
The cpo isn't readily available anywhere. I've been told that due to the lack of interest is the reason why these control panels aren't reproduced. I sent a Tekken Tag and Tekken 3 to gameongrafix and Scott's going to scan both cpos so he might be able to reproduce those ones for you, but until one is scanned and is able to be reproduced you're going to be waiting awhile unfortunately...
hocuslocus
Beginner
can I scan the one I have, and send it to him. I'm not good with photo shop its just has a slightly yellowing. no scratches dents or dings. I ask beston, and they called bandai namco america about some other parts, but he forgot to ask about the cpo. I'm going to call them tomorrow. If by some miracle I get one I'll upload the scan. regardless I'll upload the scan of my current one.
the person I bought it from already did the lcd swap, it looks like ass. just curious does anyone know what the crt used on this game was. I'm not a purist, but something just doesn't fell right without it.
I'll start another thread about this last question.
thank you for the info. and I'll scan what I have tomorrow, maybe game on graffix can photoshop it back to its original form. I've been looking for this CPO forever.
the person I bought it from already did the lcd swap, it looks like ass. just curious does anyone know what the crt used on this game was. I'm not a purist, but something just doesn't fell right without it.
I'll start another thread about this last question.
thank you for the info. and I'll scan what I have tomorrow, maybe game on graffix can photoshop it back to its original form. I've been looking for this CPO forever.
I'm sure that there's someone on here that can photoshop it. Hell I suck at photoshop, but I would give it a try! lol.
There's also a person who goes by the name Mikonos who makes prints. You might want to reach out to them to see if they have a Tekken 5 scan already. Be forewarned though. They're a pretty penny, but so worth it!
hocuslocus
Beginner
I'll give it shot, this cpo reall bothers me, its amazing that there isn't any art for tekken 5 besides the marquee
hocuslocus
Beginner
well sadly it looks like he hasn't been online since 2019
any other ideas.If I scanned it would anyone have the skill to make it look good again. I'm going to try to call bandai namco tomorrow first.
You have to email him. That's how I communicated with himwell sadly it looks like he hasn't been online since 2019
Venger
Student
I went through that search a number of years ago when I was looking for art for my Tekken 5 NNC. Nothing for a long time and then a guy in Italy who was always selling artwork listed the "arcade set". It had the instruction sheet, 2 move stickers, manual and a poster. I also got a Dark Resurrection marquee from him as I prefer that version.
Kind of surprised that this many years later no one is reproducing them. Especially since I see repros for more niche titles.
Kind of surprised that this many years later no one is reproducing them. Especially since I see repros for more niche titles.
Kaelan
Student
Bump - has anyone reproduced the CPO for Tekken 5 yet?
Kaelan
Student
I still need one too lol
mmmmaerk
Professional
What is the best way to scan panels? Mine are not very pretty, but it could be worth a try. I think I'm decent with Photoshop, but I have never worked on a CPO before. Are reproductions typically made from touched up scans, or are they made from scratch with vector graphics?
Ground_Kontrol
Beginner
I just uploaded one to GameOnGrafix, so you might want to ask them if they can print you one. Full size is 34.5" x 14". It's a bit of a Frankenstein job. The source CPO had been cut into pieces and glued onto a backing piece in patchwork fashion. I filled in the missing pieces as best I could, using the blurry photos I found online as a guide. The test print looks good, at least, good enough for an arcade. I replaced the Namco logo with the Tekken 5 logo, because I thought it looked better. Here it is at 10% of the original resolution (the site choked on the 32,000x14,000 pixel version).
Do you think you could make a version without the button and joystick holes as well as the labels? I'm thinking it someone wants to slap this on a Dynamo cabinet they'll have a hard time with the button layouts.I just uploaded one to GameOnGrafix, so you might want to ask them if they can print you one. Full size is 34.5" x 14". It's a bit of a Frankenstein job. The source CPO had been cut into pieces and glued onto a backing piece in patchwork fashion. I filled in the missing pieces as best I could, using the blurry photos I found online as a guide. The test print looks good, at least, good enough for an arcade. I replaced the Namco logo with the Tekken 5 logo, because I thought it looked better. Here it is at 10% of the original resolution (the site choked on the 32,000x14,000 pixel version).
Ground_Kontrol
Beginner
Good call. It took me a couple of hours to separate out the holes and labels and then fill in the blank spaces where they were, but I did it in hope that more cabinets will get properly restored. The full resolution files are available here:
https://drive.google.com/file/d/1o-2SQA2MSkBFQ2sr-4XvhGicdVdi3Khb/view?usp=sharing
https://drive.google.com/file/d/1325EmWQlT4cY9gnug_vAI8pWb0P7DF6X/view?usp=sharing
I really hope I'm done editing this file. I started it the first week of the pandemic lockdown, got it 95% finished, and then got sidetracked on other projects. 6 months ago I did another 4% and made a test print, and made the final edits this week. I've got too many projects.
https://drive.google.com/file/d/1o-2SQA2MSkBFQ2sr-4XvhGicdVdi3Khb/view?usp=sharing
https://drive.google.com/file/d/1325EmWQlT4cY9gnug_vAI8pWb0P7DF6X/view?usp=sharing
I really hope I'm done editing this file. I started it the first week of the pandemic lockdown, got it 95% finished, and then got sidetracked on other projects. 6 months ago I did another 4% and made a test print, and made the final edits this week. I've got too many projects.