Search results

  1. DCrosby

    Big Blue (1) Restoration

    Got some glass today, and put the marquee up, I need to make another CP, before I put the "New Challengers Vinyl" overlay on there, as I'd like to make several CP's for different games that can be swapped in and out... Now I don't know what happened to this cab before, the marquee was removed...
  2. DCrosby

    OpenJVS - JVS Emulator

    Guncon 2 should work without sensors, it does for MiSter, with an adapter for sync, but there you have to turn on sync on green, and then plug into the green video signal with the yellow splitter, I don't know this but since Sync sits on a separate pin, you could possibly make a RCA adapter that...
  3. DCrosby

    Big Blue (1) Restoration

    This was my previous Dynamo SF2 Cab... with the speakers in there which I ran the same amp, and some JBL speakers to, it didn't have nearly the separation.
  4. DCrosby

    Big Blue (1) Restoration

    So I got a Big Blue Rev 1 cab, which was in not great shape, and I'm starting to rebuild it, I've documented some of it, and there are some notable departures from the original. But I wanted to have a flexible cab where I could run all the games / boards I own, not necessarily on a switcher but...
  5. DCrosby

    Hello from Los Angeles!

    Welcome, there are a bunch of us here in L.A, feel free to reach out for local support if needed...
  6. DCrosby

    Big Blue (Rev1) Marquee Bulb / Fixture size.

    I'm wondering if someone has the proper fixture (Dimensions) for a big blue's marquee, I want to get an LED setup, but I think if I put in a Neon Tube fixture if someone wants to later on retro-fit it with an actual neon bulb they could. But I'm wondering how long / what type the original...
  7. DCrosby

    27D9200 Wiring

    This is how it ended up, and works. (I removed the sketchy punch through wires) And you'd need to move the connector at the top over to CGA/EGA as well... (To make it work)
  8. DCrosby

    27D9200 Wiring

    Funny, before I posted I tried to put the wire just in the V/S Slot.. and remove it from H/S as well as removing the ground, all of which made it worse... but as fate would have it the only thing I didn't try was putting the white wire into the H/S slot, and it works straight out of the gate....
  9. DCrosby

    27D9200 Wiring

    Cool, thank you that makes a lot of sense, I lacked the context for why the pins were repeated...
  10. DCrosby

    27D9200 Wiring

    So this was from another WG (Different) monitor, that I had in the past... so what you're saying is I only need Horizontal Sync H/S ?
  11. DCrosby

    27D9200 Wiring

    So I found this manual... https://www.arcade-museum.com/manuals-monitors/Wells-Gardner-27d9200-33d9200.pdf It shows pretty well how it's supposed to work, the issue is I get these glitches in the sync when I go through the RGB Molex KK 10 pin Connector. This is with VGA ...
  12. DCrosby

    Capcom Big Blue Gen 1 Four Slot

    I just got mine, but with no harness and no PSU, I had to "Hot Wire" the monitor... and then hook up one of my MiSters but it worked, and looked amazing on a CRT... I was wondering where I could get the Vinyl for the pieces I'm replacing at the front, the particle board is all rotten... but...
  13. DCrosby

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    I'm still not 100% Certain, but a couple of things, when I had the issue initially I had patched the Pi to the latest version, When I then Re-Imaged the SD, from a download 6-1-4 I believe, I then tried to turn on both Open JVS, and Power Save, and it did the same thing (I also didn't have the...
  14. DCrosby

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    After 2+ years of the wipi netbooting working, I encountered an oddity, where once I re-booted I got into the Wipi right as the AP showed on my phone, quickly went over to a game, launched it, and it got 26% done, and the whole thing shut down, I see the Network Port light go out, and no...
  15. DCrosby

    MITSU CPS1.X Multi Dual Crystal

    I'll take a Full Kit...
  16. DCrosby

    SYS2X6 USB Dongle -- System 246/256 Multi

    256, It has a Switch and can play both 246 and 256 games (as I recall there are 1-2 exceptions), but that device you posted the quote on, is at this point Vaporware... or Unobtainium... pick your metaphor... so depends on what you're asking / referring to... the 256 or the Key/Dongle
  17. DCrosby

    SYS2X6 USB Dongle -- System 246/256 Multi

    I'd buy one if offered for sale..
  18. DCrosby

    SYS2X6 USB Dongle -- System 246/256 Multi

    Not Currently
  19. DCrosby

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    IDK how else to test it, it has a SCSI port, and you could attach a CF Card Reader and see if the Dimm is good / IE if it can read any games... otherwise I'd send it to Ken @ I Can Repair Sega...
  20. DCrosby

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Could be you have a bad daughter board... for the Net-Dimm... maybe you have someone near you who can lend you a known working net-dimm, otherwise I can try and grab a picture one of mine, and you can match the dip switches.... but I suspect the Dimm Board...
Back
Top