Search results

  1. Fluffy

    Solder Fume Extractor

    There you go, add a second nozzle and use it from your workbench. View: https://youtube.com/shorts/CKSdHkjkFHU
  2. Fluffy

    Solder Fume Extractor

    https://www.matterhackers.com/store/l/bofa-filter-for-ad350-fume-extractor-combined-filter/sk/M96DAG1M (This is just the filter!) I expect there are cheaper sources.
  3. Fluffy

    SCAM Prevention, Education

    That's always good to hear. It's too often that behaviour that would get police attention "IRL" just gets a shrug online. It's frustrating that you often can't do anything, I have several break-in attempts a minute at our company servers, especially if we're in the news, and all I can do is...
  4. Fluffy

    FM Towns; the hardware, the games, the arcade ports

    From what I understand the problem is that the graphics chip produces an NTSC video signal directly, without a separate encoder you could grab an intermediate RGB signal from. The NES rgb mods either use an FPGA implementation of the PPU, the arcade NES PPU that produces RGB already, or operate...
  5. Fluffy

    Cave CV1000-D bootlegs a hoy

    View: https://youtu.be/zSkGtW-fQ3s
  6. Fluffy

    MVS joypad port pinout

    In short, they are output ports. Used by the FCT1B board to multiplex controllers or by the Mahjong controller to multiplex buttons. On MVS MV1B and MV1C they are on a separate connector, which is not available on other boards. It would be useful to know if the joypad ports can be used instead.
  7. Fluffy

    MVS joypad port pinout

    I should've checked the Schematics, MV1F and AES as well: https://wiki.neogeodev.org/index.php?title=File:Mv1fs-page1.jpg https://wiki.neogeodev.org/index.php?title=File:Neogeo_aes_schematics_pal_2-page-003.jpg
  8. Fluffy

    MVS joypad port pinout

    Can someone with experience with/access to multiple board types confirm if the boards that have joypad ports: https://wiki.neogeodev.org/index.php?title=MVS_board_types Have OUT1-OUT3 wired to the joypad ports: https://wiki.neogeodev.org/index.php?title=Pinouts#Joypad_ports ?
  9. Fluffy

    The cart overflows, how are ya'll storing your MVS/AES carts?

    You know you can just buy a larger shelf? ;)
  10. Fluffy

    PGM Motherboard In Game reseting to Service Menu

    The largest easily available 5V flash part that can be hand soldered I found is 39sf040, which is 512kB * 8bit. Larger chips are only available in 3.3V. The PGM operates at 5V. Going from a 3.3V output to a 5V input is not a problem, as that is still over the threshold that reads as 1 on the 5V...
  11. Fluffy

    PGM Motherboard In Game reseting to Service Menu

    Odd. :) I noticed he listed "Fluffy" carts, but just assumed since I released the Gerbers that he gives people a choice between lydz and my boards. lydz boards are easier to "mass"-produce, or maybe they've got lots of stock?
  12. Fluffy

    Interest Check - NEW MVS MULTI BATCH!!

    From what I understand the ngdev cartridges have an extra cpu on the program board, similar to PGM. In the end it is their decision, looking how quickly bootlegs appear on aliexpress it is understandable.
  13. Fluffy

    Interest Check - NEW MVS MULTI BATCH!!

    Ordered mine. Looking forward to it!
  14. Fluffy

    How to convert files to work with NeoGeo Multi

    I'll have a look if I can automate the whole thing once I've got my own multi...
  15. Fluffy

    Cave CV1000-D bootlegs a hoy

    If you go into this with the right mindset, that you're buying a (probably good) repro, then there is nothing wrong with this. Maybe the price goes down a bit once all the rich collectors have one, then again, they may run out of components.
  16. Fluffy

    Neo geo Kizuna Encounter 4p board

    My NBM arrived, and I was able to test this with the UniBIOS, and the game reports itself as 4 player version: So far I've been unable to test an actual 4 player game, though... The best I get is 2 players against 2 AI, with one player playing the main char and the other the tag buddy on the...
  17. Fluffy

    Cave CV1000-D bootlegs a hoy

    Though there was a time when custom PCBs were unaffordable without a significant investment, or making very small numbers etching them yourself. There are now things like https://tinytapeout.com/ , and there are companies that can turn your working FPGA design into an ASIC for something like...
  18. Fluffy

    Cave CV1000-D bootlegs a hoy

    I'm getting 403 forbidden for the image.
  19. Fluffy

    Cave CV1000-D bootlegs a hoy

    Someone already started to port mister to a larger FPGA, it is only a matter of time for the DE-10 to be replaced with something more powerful.
Back
Top